Adams Rite 2290 - Dual Force® Interconnected Deadbolt / Deadlatch for Wood or Hollow Metal Stile and Rail Doors - With ME Lever
The Dual Force® 2290 Interconnected Deadbolt/Deadlatch provides access control and security for wood or hollow metal doors. Latch and deadbolt capabilities are combined for fast, easy, and panic-proof exiting.
The Dual Force 2290 combines the access control capabilities of a latch with the security of a deadbolt. The key retracts and extends the deadbolt (and deadlatch) from either side. The exterior lever retracts the latch only while the inside lever retracts the deadbolt and latch simultaneously for fast, easy, panic-proof exiting. Intended for out-swinging doors.
Key or thumbturn retracts or extends deadbolt or deadlatch. Inside lever retracts both when configured with interconnect feature. Outside lever retracts latch only. Latch holdback feature activated or deactivated by turning key to retract latch and sliding holdback button on faceplate down to hold and up to release.
Inter-Connection: Field selectable inter-connection feature allows interior trim to retract deadbolt and deadlatch. Consult the local building official for guidance in code compliance. 1-3/4” minimum door thickness required.
Cylinder Basket: 1-1/8” or 1-1/2” only.
Latchbolt/Deadbolt: Latchbolt: 5/8” throw, solid brass. Easily reversible using only a screwdriver. Deadbolt: 1” throw, stainless steel.
Auxiliary Deadlatch Pin: Stainless steel. Deadlocks latch bolt to prevent “loiding” or case-knife entry.
Faceplates: Measures 1-1/4” x 8”. Includes FaceStyle faceplate system that adapts to flat or beveled door edge.
Strikes: Standard strike furnished is the 2206 (ASA) strike for flat jamb where door closes flush or nearly flush.
Cylinder Cam: The Dual Force 2290 is operable by any standard 1-5/32” diameter mortise cylinder with MS® cam. Cylinders with MS® cams can be readily obtained from most cylinder manufacturers.
Options: Specify trim option, lever style, finish, and strike. Also adapts to paddle operator 4591. See 2190 for aluminum door version for narrow stile door construction. Thick Door Kit 2190-TDK-XX available separately. Specify door thickness. Request to Exit RXK-4600 switch available for small format levers. Note that the low profile trim (trim option 3) is recommended for in-swing door applications.
Electrified Trim Options: Order 2190 Electrification Kit EK-2190 for adding to the clutched exterior lever. Dual voltage 12/24 VDC rated for continuous duty operation. Energizing the lever allows exterior lever to be turned to retract latch only. The electrified option is not available for low profile trim (trim option 3).
Standard Package: Individually boxed with trim as specified, strike and machine screws for mounting. Cylinders available separately. Shipping weight: 2 lbs.