Cylindrical Lock | PDQ GT | Intruder Lock

Description

Get all your locks Keyed | PDQ Door Hardware | PDQ GT Series Cylindrical Lock

KEYWAY

PDQ GT Series Grade 1 Cylindrical Locks

The PDQ GT Series Cylindrical Lock is a Grade 1, extra heavy duty cylindrical lock. The lock is available in many different functions such as Communicating, Bedroom/Bathroom Privacy, Storeroom, Hospital Privacy, Classroom etc. Choose from one of the functions which best fulfill your need for a commercial door lock.

This PDQ cylindrical lock is ANSI/BHMA grade 1 certified but significantly exceed BHMA requirements for cycle test, having been tested for over 3 million cycles, which is 3 times the BHMA standard. The lock also significantly exceed BHMA requirements for lever torque test, having been tested for over 2,200 lbs which is also 3 times the BHMA standard.

Choose from three different aesthetically appealing lever styles when purchasing the PDQ GT Series Cylindrical Lock, including Boston style lever, Miami style lever and Philadelphia style lever. Also choose from many different top quality finishes such as Bright Brass, Satin Brass, Satin Bronze, Oil Rubbed Bronze, Bright Chromium and Satin Chromium, when purchasing this grade 1 lock.

The lock comes in a Standard Override Cylinder, or an Interchangeable Core Preparation including the Large Format Interchangeable Core or the Small Format Interchangeable Core. The Large Format IC is only available with the Satin Chrome Finish and Philadelphia Lever Style.

Select the keying alike option, if you are purchasing more than one lock and want all of them to be keyed alike.

PDQ Door Hardware is known for their quality, durability and performance. Buy PDQ Door Hardware such as heavy duty locks and other quality products at affordable prices from Locksandsafes.com.

Note: Learn more about What is a Cylindrical Locks?, in our Blogs written by our expert locksmiths. Also learn more about what are the different kinds of locks? in our Blog section.

SPECIFICATIONS

FOR DOORS

1-3/4” to 2-1/4” thick
Preset for 1-3/4” door

APPLICATION

Through door thru-bolting

DOOR PREP

Standard ANSI A156.115 (161) for Cylindrical Locks

BACKSET

2-3/4” Standard. 2-3/8”, 3-3/4” and 5” Optional (Ordered from factory only).

CHASSIS

Heavy duty zinc diecast, investment cast, chromated cold rolled steel, stainless steel and EZAC™ diecast mechanism. Billet Steel spindles for locking functions

FRONT

2-1/4” x 1-1/8”
Stainless Steel or Wrought Brass
Beveled 1/8” in 2”

STRIKE

ASA standard
T-Strike or Full Lip Strike optional
Stainless Steel or Wrought Brass

ROSE

3-3/8” DIA Wrought

LATCHBOLT

9/16” Throw Deadlocking
3/4” Latch projection for available as option.

HAND

Non Handed

TRIM

Solid Zinc diecast PHL, BSN or MIA Levers
41° Lever Rotation Standard with 2-3/4” backset
Wrought Brass Roses, Concealed Screws
65° Lever Rotation Standard with 3/4” latch for double doors (Ordered from factory only) and all 2-3/8”, 3-3/4” and 5” backsets (Ordered from factory only

KEYS

Two (2) per lock

KEYWAYS

SCC standard (Schlage C Compatible)
Also available in keyways of other manufacturers

INTERCHANGEABLE CORE

Available for all keyed functions
6 or 7-pin
Large Format IC Core available for PHL Lever ONLY.
Compatible with Best, Falcon and Arrow.

CYLINDER

6-pin Brass Insert Cylinder keyed to 5-pins

KEYING

Options: MK, CMK or GMK
Zero Bitted (KO), Keyed Different (KD) or Keyed Alike (KA) Can be keyed into existing master key systems

FINISHES

• 605 (US3), 606 (US4), 612 (US10), 613 (US10B), 625 (US26), 626 (US26D)
Optional Antimicrobial Coating 626 (USD26D) only‡

CERTIFICATIONS,LISTINGS, COMPLIANCES:

UL listed for 3 hrs, for single doors up to 4’0” x 8’0”
Certified to ANSI/BHMA A156.2, Grade 1
California Education Code Compliant (Functions GT135, GT135LED, GT145)
Federal Specification FF-H-10C (Superseded by A156.2)
Approved for Florida HVHZ (High Velocity Hurricane Zone). PDQ Product Approval: FL 21376. Design load rating: ± 70.0 PSF for single door (3’ x 7’)
Complies with ADA (Americans with Disabilities Act) and ICC/ANSI 117.1 for Accessible and Usable Buildings

WARRANTY

Twenty-five (25) year Limited Warranty

COUNTRY OF ORIGIN

Proudly Assembled in the U.S.A. with U.S. and foreign material. Meets requirements of the Buy American Act.

PDQ GT SERIES GRADE 1 CYLINDRICAL LOCKS - FUNCTION LIST

STRIKES

4-7/8" (ASA) strike included with every GT unless otherwise specified.

PDQ GT SERIES GRADE 1 CYLINDRICAL LOCKS - LEVER STYLES

PDQ PRICE LIST

1 Review Hide Reviews Show Reviews

5
PDQ Classroom Lock

Posted by Stephen Wharton on Feb 28th 2020

Ordered it keyed to match our other locks. Works fine. Only the second I put in. Was a little tricky, lots easier than the first. Learning curve is not too bad. Instructions are pretty good, much better than the too often seen poorly translated ones from foreign makers!