HES 8000 - Electric Strike for use with Cylindrical Locksets | 630 Satin Stainless Steel Finish

HES 8000 Concealed Electric Strike for Cylindrical Locksets | 630 Satin Stainless Steel Finish

Buy 8000 Electric Strike with Pre load here (Click on link below):

8000 Electric Strike Bodies

Buy 8000 Faceplates here (Click on link below):

801 For use with: Cylindrical locksets in ANSI metal jambs, with latchbolts up to 5/8” throw

801A For use with: Cylindrical locksets with latchbolts up to 5/8” throw. Includes universal mounting tabs. Aluminum frames.

801E For use with: Extended lip for ‘knock-down’ style frame installations. For use with cylindrical latchbolts up to 5/8” throw.

802 For use with: Cylindrical locksets with latchbolts up to 5/8” throw. Includes universal mounting tabs. Aluminum frames.

803 For use with: Cylindrical locksets with latchbolts up to 5/8” throw. Includes universal mounting tabs. Aluminum frames.

805 For use with: Cylindrical locksets. For use with latchbolts up to 5/8” throw Four point mounting for wood installations.

Accommodates no-cut frame & vertical adjustment with ½”-5/8” cylindrical latchbolts. Includes 8000 electric strike body, 801 & 801A faceplates (4-7/8” x 1-1/4”) and mounting hardware. The 8000 series is a compact, high-performance electric strike featuring a unique concealed design for use with cylindrical locksets. No cutting on the frame is required. Simply remove the existing strike plate, adjust the vertical alignment feature to the latchbolt centerline, and install. Its strength is derived from a unique keeper pin locking design, enabling the 8000 to exceed the ratings of the frame, door and locking hardware. This field selectable fail secure/fail safe unit is easy to install and accommodates latchbolts up to 5/8" throw.

Frame application

Metal, Wood

Electrical

.24 Amps @ 12VDC/VAC
.12 Amps @ 24VDC/VAC
DC continuous duty/AC intermittent duty only

Standard Features

No cutting on frame required
Vertical adjustability to accommodate door sag and misalignment
Tamper resistant
Static strength 1,500 lbs.
Dynamic strength 70 ft-lbs.
Endurance 500,000 cycles
Field selectable fail safe/fail secure
Dual voltage 12 or 24 VDC/VAC
Non-handed
Internally mounted solenoid
Accommodates 1/2"-5/8" cylindrical latchbolt (5/8" with 1/8" door gap)
Strike body depth 1-1/16"
NEW! Strike body width decreased to 1-7/16" to increase frame compatibility
Five year limited warranty

Finishes: 630 - Satin stainless

Optional Features

LBM - Latchbolt monitor

Click here for more information