Yale
Yale 8809 | 8800 Series Grade 1 Mortise Lock | Classroom or Office with Thumbturn Function
Don't see the quantity, finish, or function you are looking for? We can mix, match and "BUILD" the item option set you are looking for - Just call us at 860-537-1328 and our sales staff will assist !
Yale 8809 | 8800 Series Grade 1 Mortise Lock | Classroom or Office with Thumbturn Function
FUNCTION
Classroom or Office with Thumbturn
• Latchbolt retracted by knob/lever either side unless outside knob/lever is locked by key outside or thumbturn inside
• Latchbolt retracted by thumbturn inside or key outside
• Inside knob/lever always active
• Deadlocking latchbolt
SPECFICATIONS
Armor Front
8" x 1-1/4"
Backset
2-3/4" only
Case
Wrought steel, zinc dichromated
Deadbolt
1" throw, cast stainless steel.
Handing
Field reversible
Hubs
3/8" solid steel, fine-blanked and heat treated for additional strength
Latchbolt
3/4" throw, stainless steel one-piece anti-friction
Strike
1-1/4" (model 2815) curved lip strike standard, please contact us for other strikes.
ADA
The 8800 meets accessibility guidelines of the Americans with Disabilities Act and the requirements of the Uniform Federal Accessibility standards and ANSI 117.1, all requiring ease of accessibility.
ANSI/BHMA
Certified ANSI/BHMA A156.13, Series 1000, Operational Grade 1 (8800FL with CN escutcheon & SL8800 meet Security Grade 1).
Bevel Front
ACCENTRA 8800 series fronts are free-floating to adjust from flat to the standard bevel of 1/8" in 2".
Door Thickness
8800 Series Mortise Locks are supplied as standard for 1-3/4" thick doors. For other than standard (i.e. 2", 2-1/4", etc.), please contact us.
Installation
ACCENTRA 8800 Series sectional and escutcheon trims feature thrubolted installation. Outside trim is held in place by threaded posts. For sectional trims, the posts fit through holes in the lock case and are secured by thrubolts from the inside trim. For escutcheon trims, the posts fit through the door and are secured by thrubolts from the inside trim. The posts fit through holes in the door, above and below the lock case, and are secured by thrubolts from the inside trim.
ISO 9001
Designed and manufactured under a certified ISO 9001 quality system.
Lead Shielding
All ACCENTRA 8800 Series Mortise Locks are available with a lead shield for installation in lead-lined doors. To order, suffix the lockset model number with “lead-lined.”
Knurled Designs
Where required by the local authority, trim can be knurled to be identifiable to the touch for blind persons. CO knob design and all lever designs except HA and Reflections® trim may be ordered knurled.
Underwriters Laboratories (UL/cUL)
ACCENTRA 8800 Series Mortise Locks have been listed by Underwriters Laboratories Inc. for use on fire doors having a rating up to and including 3 hours and for use on 20 minute wood doors. This pertains to single swing doors not exceeding 4 feet in width and 8 feet in height and in doors mounted in pairs not exceeding 8 feet in either direction (unless otherwise noted in the individual listings.)
In general, single-point mortise locks or latches with 3/4" minimum latch throw are intended for the active leaf of doors mounted in pairs, with the inactive leaf provided with top and bottom flush or surface bolts of the manual, automatic, or selflatching type. The door Classification Marking specifies the minimum latch throw required for the individual door.
ACCENTRA 8800 Series Mortise Locks with 3/4" throw latchbolts may also be used on single swing doors rated 1-1/2 hours or less, up to 4 feet in width and 9 feet in height. This is in addition to the rating mentioned above. All 8800 Series Mortise Locks with Lever Handle Trim are UL listed for fire door applications. Underwriters Laboratories does not list locks with rabbeted fronts, locks with deadbolt only, or locks with hold-back feature on the latchbolt.
Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and ASSA ABLOY ACCENTRA™ makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
YALE STANDARD LEVER ON ROSE
YALE STANDARD LEVER ON ESCUTCHEON
YALE REFLECTIONS LEVERS
YALE KNOB ON ROSE
YALE KNOB ON ESCUTCHEON
YALE ROSE STYLES
YALE ESCUTCHEON STYLES
- Option:Choose Cylinder Option (What is a Lock Cylinder? Click link here to know more):
- https://blog.locksandsafes.com/2021/03/17/lock-cylinder-and-keyway-guide/
- Option:Choose REX Switch Option (What is a REX Switch Option? Click here to know more):
- https://blog.locksandsafes.com/2021/09/06/request-to-exit-explained/
- Option:Choose Handing (What Is It? Click Link Here To See Our Door Handing Guide):
- https://blog.locksandsafes.com/2020/07/28/door-hardware-handing-guide/
- Option:Choose Antimicrobial Coating Option (What is an Antimicrobial Coating? Click link here to know more):
- https://blog.locksandsafes.com/2020/09/07/antimicrobial-coating-on-locks/