Note: 1-3/4" is standard for dimension "A": Mounting holes to outside lip of strike (See Drawing). For variants of this dimension, please fill out quote request form(Located on top header) or call for availability/Lead times.
ADAMS RITE 7110 AND 7111 ELECTRIC STRIKES
7110 Electric Strike with 7-15/16” faceplate and 7111 Electric Strike with 10-1/4” faceplate are designed for use with Adams Rite deadlatches or cylindrical locksets with 1/2" [12.7 mm] to 5/8" [15.9 mm] latchbolt projection. For use in aluminum, hollow metal, or wood applications.
This Adams Rite Electric Strike can be used to facilitate remote electrical control of any door equipped with an Adams Rite 4500, 4700 (discontinued), or 4900 Deadlatch or cylindrical lockset with 1/2" [12.7 mm] to 5/8" [15.9 mm] latchbolt projection. Electrical actuation unlocks the keeper, releasing the latchbolt so the door may be opened without operating the latch itself.
The Adams Rite Electric Strike has the following certifications/listings:
- UL 1034 burglary-resistant listed
- UL 294 (6th Edition) listed
1" x 3-3/8" x 1-5/8" deep
[25.4 mm x 85.7 mm x 41.3 mm deep].
5/8" x 1-7/16" x 1/2" deep
[15.9 mm x 36.5 mm x 12.7 mm deep].Bolt retaining keeper is stainless steel.
Strike accepts bolt of any Adams Rite 4500, 4700 (discontinued), or 4900 Deadlatch or cylindrical latches.
Basic strike has lip of proper length for 1-3/4" [44.5 mm] thick door that closes flush with jamb edge. Where door thickness or jamb shape differs from this standard relationship, lip extension kits are available, specified by last dash number.
Projection 1/2" to 5/8" [12.7 mm to 15.9 mm]
1-1/4" x 4-7/8"
[31.8 mm x 123.8 mm]
Flat with square corners.
652 Satin Chrome
Individually boxed with mounting screws, mounting clips, adhesive shims to accommodate jamb or stile extrusion thickness greater or less than nominal 1/8" [3.2 mm].
2 lbs [0.91 kg].
Available in 12, 16, or 24 Volt AC and DC. DC continuous units are silent, AC intermittent units “buzz” on operation.
0.33A at 12 VDC 1.42A at 12 VAC
0.22A at 16 VDC 0.63A at 16 VAC
0.17A at 24 VDC 0.74A at 24 VAC
Fail Safe | Fail Secure
Field selectable at time of installation. However, AC intermittent solenoid must not be used continuously in either.
- Available with two Form ‘C’ monitoring switches to indicate when the latchbolt is engaged in the strike and whether the strike jaw is blocked.
- Lip extension kits for various dimensions of door centerline to jamb edge; for flat faceplates only.
- Modular Packaging Match one strike body kit with one faceplate kit to make a complete electric strike. Faceplate kits contain all hardware to mount electric strike. Please contact us for details.
All measurements are approximate and are provided for informational purposes only. Refer to the product installation instructions.