Sargent KP-8276 | Sargent Keypad (KP) Series Standalone Electronic Mortise Lock, Grade 1

Sargent KP-8276 | Sargent Keypad (KP) Series Standalone Electronic Mortise Lock, Grade 1

FUNCTION

SPECIFICATIONS

A. Stand alone access control mortise locks shall be KP8200 Series as manufactured by SARGENT Manufacturing
Company, New Haven, CT.
B. Provide access control mortise lock series, type, and function where specified in hardware groups, with the provisions
below.
- Cylinders: Provide SARGENT Signature Series mortise cylinders.
- Backsets: 2-3/4 inches.
- Strikes: Provide wrought boxes and strikes with proper lip length to protect trim but not to project more than 1/8 inch beyond trim, frame or inactive leaf.
C. Locks shall meet ANSI/BHMA A156.13, Grade 1 requirements.
D. Locks shall be UL listed for use on fire doors.
E. Provide access control products with non-volatile memory.
F. In addition to user codes, provide a Master Code as standard. The Master Code assigns emergency, supervisory, and user codes.
G. Lock shall have the ability to print the last fifteen entries via infrared printer.
H. Locking and unlocking of the lever handle shall be done by a motor-driven battery powered unit (solenoids not acceptable) contained completely within the body of the mortise lock. The inside lever is always free for egress.
I. Provide lever design to match other locks on the project.
J. Provide LED’s on unit to indicate status – unlocked and programming mode.
K. Provide weatherseal gasketing for keypad at exterior applications.

MECHANICAL FEATURES

• Certified to ANSI/BHMA A156.13 Series 1000 Operational Grade 1 and Security Grade 1 with all standard trims
• Motor driven 8200 Series mortise lock
• Stainless steel 3/4" (19mm) projection one-piece, anti-friction reversible latch
• Stainless steel non-handed auxiliary deadlatch
• Specify hand on order. Easily field reversible without disassembling lock body
• Includes code to activate horn when keypad buttons are pushed
• Lever trim through-bolted for increased security and durability
• 1-3/4" (44mm) door standard. Consult factory for other thicknesses
• 4-3/4" (121mm) minimum stile for electrical function locks

KEYPAD FEATURES

• Non-volatile memory
• All programming at keypad
• Keypad made of ultraviolet stable textured material
• Operating temperature for keypad: 4°F – 140°F
• Adjustable unlock time
• LEDs on keypad
- Green indicates unlocked
- Yellow indicates programming mode
- Flashing green and solid yellow indicates deadbolt thrown
• Use on exterior doors with weatherseal gasket and shroud
• UL Listed for fire doors (12 - required for KP8800/8900 Series)
• UL Listed to Canadian safety standards
• Built-in remote “Request to Enter” requires wire harness (52-2071)
• User Codes - over 1,100,000 possible user combinations
- 100 user codes
- Operates utilizing any one to six digits per code - digits may be repeated or start with “0”
- One master code - assigns emergency, supervisory and user codes, allows access during low battery
- One emergency code - allows entry when deadbolt is thrown (KP8276/KP8277) or during low battery
- One supervisory code - allows temporary lockout of selected users, changes unlock time duration, requests
infrared interrogation output, and may add user codes
- “One time” user codes allows visitors “one time” entry
- Entry of three wrong user codes in succession disables all codes for ten seconds
- Unit can be put in “passage only” mode at keypad
• Low battery indication - four chirps after code entry
• Operates with 4 “C” alkaline batteries (included)
• Typical 40,000 operations per set of batteries

INSIDE ESCUTCHEON

• Zinc die cast
• Projection at bottom 9/32" (7mm)
• Projection at top 2-1/8" (54mm)