Select SL11 HD Heavy Duty Concealed Geared Continous Hinges | Flush Mounted for 1-3/4" Doors

 

Select SL11 HD Heavy Duty Concealed Geared Continous Hinges | Flush Mounted for 1-3/4" Doors

The Select SL11 HD Heavy Duty Geared Hinge for Flush mounted (no door inset), 1-3/4" thick doors. The SL11 HD is available in different lengths and colors. Lengths offered in 79", 83", 85", 95" and 120". The Select SL11 HD is also offered in three colors, Black Anodized Aluminium, Clear Anodized Aluminium and Bronze Anodized Aluminium.

Electrification options for Select SL11 HD are also available. Please contact us for more information.

The Select SL11-HD conforms to the famed Select quality. Features of the Select SL11-HD such as ANODIZED AFTER MACHINING - delivers superior wear, durability and life, and at the same time inhibits corrosion.This eliminates the need for periodic maintenance.

Cross Reference for the Select SL11-HD - Roton 780-112HD, Pemko FMSLFHD/KFMHD, McKinney MCK12HD, Stanley 661HD

Features

MATERIAL:

Extruded 6063 T6 aluminum alloy with self-lubricating polyester thrust bearings. The Select SL11HD is made from recycled aluminum which reduces environmental impact and qualifies for LEED points.

LENGTHS:

83", 85", 95" lengths standard for nominal door heights. Custom lengths are available. Please contact us.

LOAD/FREQUENCY RATINGS:

For 1-3/4" doors. 48" max. door width in 16 gauge hollow metal (min.) or 1/8" aluminum (min.).

Standard Duty — Tested per BHMA standards for medium-frequency doors up to 200 lb. without frame or door reinforcement. Click here to view SL11 SD

Heavy Duty — The Select SL11HD is tested per BHMA standards. Up to 200 lb. doors (high-frequency) and up to 400 lb. doors (medium-frequency) without frame or door reinforcement; up to 600 lb. doors (low-frequency) with the use of Rivnuts in the frame and door.

Heavy Duty (LL) — Our HD hinge with additional fastener holes for low-frequency doors up to 1,000 lb., including most lead-lined doors. Rivnuts are recommended in the frame and door on extremely tall, extremely heavy or wide doors. Click here to view SL11 LL.

FINISHES:

All SL11 hinges are stocked in Clear, Dark Bronze and Black anodized aluminum. Custom anodized or painted finishes are available. Product painted or anodized in the field voids the SELECT hinge warranty.

CLOSERS:

Conventional overhead surface, concealed sliding arm overhead or floor closers may be used with SELECT hinges. Pivot-type floor closers (with a fixed, conflicting center pivot) must be replaced.

ORDER:

Specify length, finish and standard duty (SD), heavy duty (HD) or heavy duty with additional fastener holes (LL). Also, specify door and frame screw applications. 12-24 x 3/4" self-drilling, thread-forming 410SS Phillips undercut flathead screws are provided as a standard pack unless otherwise specified. Wood and thread-forming screws also available. Security screws optional at extra cost.

AVAILABLE ELECTRIC PREPS:

EPT, ATW, EMS, CTW4, CTW5, CTW8, CTW10, CTW12, CMG, AP and RP. For CTW12 prep, please consult us for engineering approval.

BHMA CERTIFICATION:

Select SL11SD, Select SL11HD and Select SL11 LL geared continuous hinges conform to BHMA Standard ANSI/BHMA A156.26-2006 Grade 1

Part Number Interchange

Select Hinges Product Selection Table

SELECT GEARED HINGES
Full Surface (Click Image Below to Go to Category)	Half Surface (Click Image Below to Go to Category)	Full Mortise/Concealed (Click Image Below to Go to Category)	Half Mortise (Click Image Below to Go to Category)	Swing Clear (Click Image Below to Go to Category)	Wide Throw (Click Image Below to Go to Category)	Toilet Partition (Click Image Below to Go to Category)
SL21SD,SL21HD	SL53HD	SL11SD, SL11HD, SL11LL	SL52HD	SL41HD, SL41LL	SL40HD	SL60/SL62
SL57SD,SL57HD	SL54HD	SL12HD
	SL77HD	SL14SD,SL14HD
		SL18SD,SL18HD,SL18LL
		SL24SD,SL24HD,SL24LL
		SL26LL
		SL27LL
		SL31HD
		SL38SD
		SL44HD
		SL48HD
		SL71HD
		SL84HD, SL84LL

SELECT PIN & BARREL HINGES
Full Surface (Click Image Below to Go to Category)	Half Surface (Click Image Below to Go to Category)	Full Mortise/Concealed (Click Image Below to Go to Category)	Half Mortise (Click Image Below to Go to Category)	Swing Clear (Click Image Below to Go to Category)	Toilet Partition (Click Image Below to Go to Category)
SL302	SL303	SL200	SL306	SL310	SL402TP
SL309		SL300		SL311	SL902TP
		SL305
		SL315
		SL3500