Select SL38 SD Standard Duty Concealed Geared Continous Hinges

 

Select SL38 SD Standard Duty Concealed Geared Continous Hinges | Select SL38 SD Piano Hinges

The Select SL38 SD is a standard duty hinge which is available in lengths of 83" and 95" only and is a great alternative to the Roton 780-110 hinge. The Select SL38 SD is a high quality product which has been tested to last six decades.

Electrified options for the Select SL38 SD are also available. Electrification options include Exposed Electric Monitor Switch (EMS), Concealed Adjustable Monitor Switch (CMG), Access Panel (AP) and Removable Panel (RP). Call us at 860-537-1328, if you want your Select SL38-SD with electric preparation.

The Select SL38-SD is available in two finishes - clear anodized aluminium and dark bronze anodized aluminium. Custom finishes for the Select SL38-SD are also available. Call us, if you require your Select SL38 SD piano hinges in any other painted or anodized finish.

Buy Select Hinges online from locksandsafes.com. We sell Select Hinges at very attractive prices. While buying Select Hinges online from us, if you have any doubts, please feel ree to call us.

Features of the Select SL38-SD

MATERIAL:

Extruded 6063 T6 aluminum alloy with selflubricating polyester thrust bearings.

LENGTHS:

The Select SL38SD is available in 83"and 95" lengths standard for nominal door heights. Hinges can be cut to shorter lengths. Longer hinges are not available.

LOAD/FREQUENCY RATING:

For 1" to 1-3/8" doors. 48" max. door width in 16 gauge hollow metal (min.) or 1/8" aluminum (min.).

Standard Duty – Tested per BHMA standards for medium-frequency doors up to 200 lb. without frame or door reinforcement.

FINISHES:

All Select SL38SD hinges are stocked in Clear and Dark Bronze anodized aluminum. Custom anodized or painted finishes are available. Product painted or anodized in the field voids the SELECT hinge warranty.

CLOSERS:

Conventional overhead surface, concealed sliding arm overhead or floor closers may be used with SELECT hinges. Pivot-type floor closers (with a fixed, conflicting center pivot) must be replaced.

ORDER:

Specify length, finish and standard duty (SD). Also, specify door and frame screw applications. 12-24 x 3/4" self-drilling, thread-forming 410SS Phillips undercut flathead screws are provided as a standard pack unless otherwise specified. Wood and thread-forming screws also available. Security screws optional at extra cost.

AVAILABLE ELECTRIC PREPS:

EMS, CMG, AP and RP

Select SL38SD Screw Count

Part Number Interchange | Select SL38 SD Piano Hinges Cross Reference

Select Hinges Product Selection Table

SELECT GEARED HINGES
Full Surface (Click Image Below to Go to Category)	Half Surface (Click Image Below to Go to Category)	Full Mortise/Concealed (Click Image Below to Go to Category)	Half Mortise (Click Image Below to Go to Category)	Swing Clear (Click Image Below to Go to Category)	Wide Throw (Click Image Below to Go to Category)	Toilet Partition (Click Image Below to Go to Category)
SL21SD,SL21HD	SL53HD	SL11SD, SL11HD, SL11LL	SL52HD	SL41HD, SL41LL	SL40HD	SL60/SL62
SL57SD,SL57HD	SL54HD	SL12HD
	SL77HD	SL14SD,SL14HD
		SL18SD,SL18HD,SL18LL
		SL24SD,SL24HD,SL24LL
		SL26LL
		SL27LL
		SL31HD
		SL38SD
		SL44HD
		SL48HD
		SL71HD
		SL84HD, SL84LL

SELECT PIN & BARREL HINGES
Full Surface (Click Image Below to Go to Category)	Half Surface (Click Image Below to Go to Category)	Full Mortise/Concealed (Click Image Below to Go to Category)	Half Mortise (Click Image Below to Go to Category)	Swing Clear (Click Image Below to Go to Category)	Toilet Partition (Click Image Below to Go to Category)
SL302	SL303	SL200	SL306	SL310	SL402TP
SL309		SL300		SL311	SL902TP
		SL305
		SL315
		SL3500