Select SL26 LL Heavy Duty Concealed Edge Mount Hinges

 

Select SL26 LL Heavy Duty Concealed Edge Mount Hinges | Select SL26 LL Full Mortise Continous Hinges

Buy the Select SL26 LL Heavy Duty Concealed Geared Continous Hinge from locksandsafes.com at extremely economical prices. The Select SL26 LL is desgined for 2” to 2-1/4" doors, up to 1,000 lb. Some other properties of the Select SL26 LL heavy duty hinges are:

• Narrow frame leaf.
• Staggered hole pattern. 
• 3/32" door inset. 
• BHMA Grade 1 certified.

 Call us, for custom lengths or custom painted/custom anodized finishes on the Select SL26-LL hinge. Electric preparations for the Select SL26-LL are also available, upon request.

Features of the Select SL26-LL

MATERIAL:

Extruded 6063 T6 aluminum alloy with self-lubricating polyester thrust bearings.

LENGTHS:

Select SL26LL hinges are available in 83", 85", 95" and 120" lengths standard for nominal door heights. Custom lengths are available.

LOAD/FREQUENCY RATING:

For 2" to 2-1/4" doors. 48" max. door width in 16 gauge hollow metal (min.) or 1/8" aluminum (min.).

Heavy Duty (LL) - For low-frequency doors up to 1,000 lb., including most lead-lined doors. Rivnuts are recommended in the frame and door on extremely tall, extremely heavy or wide doors.

FINISHES:

All Select SL26LL hinges are stocked in Clear and Dark Bronze anodized aluminum. Custom anodized or painted finishes are available. Product painted or anodized in the field voids the SELECT hinge warranty.

CLOSERS:

Conventional overhead surface, concealed sliding arm overhead or floor closers may be used with SELECT hinges. Pivot-type floor closers (with a fixed, conflicting center pivot) must be replaced.

ORDER:

Specify length, finish and heavy duty with additional fastener holes (LL). Also, specify door and frame screw applications. 12-24 x 3/4" self-drilling, thread-forming 410SS Phillips undercut flathead screws are provided as a standard pack unless otherwise specified. Wood and thread-forming screws also available. Security screws optional at extra cost.

AVAILABLE ELECTRIC PREPS:

EPT, ATW, EMS, CTW4, CTW5, CTW8, CTW10, CTW12, CMG, AP and RP. For CTW12 prep, please consult us for engineering approval.

BHMA CERTIFICATION:

Select SL26LL geared continuous hinges conform to BHMA Standard ANSI/BHMA A156.26-2006 Grade 1.

Select SL26 LL Full Mortise Continous Hinges Screw Count

Part Number Interchange | Select SL26 LL Cross Reference

Select Hinges Product Selection Table

SELECT GEARED HINGES
Full Surface (Click Image Below to Go to Category)	Half Surface (Click Image Below to Go to Category)	Full Mortise/Concealed (Click Image Below to Go to Category)	Half Mortise (Click Image Below to Go to Category)	Swing Clear (Click Image Below to Go to Category)	Wide Throw (Click Image Below to Go to Category)	Toilet Partition (Click Image Below to Go to Category)
SL21SD,SL21HD	SL53HD	SL11SD, SL11HD, SL11LL	SL52HD	SL41HD, SL41LL	SL40HD	SL60/SL62
SL57SD,SL57HD	SL54HD	SL12HD
	SL77HD	SL14SD,SL14HD
		SL18SD,SL18HD,SL18LL
		SL24SD,SL24HD,SL24LL
		SL26LL
		SL27LL
		SL31HD
		SL38SD
		SL44HD
		SL48HD
		SL71HD
		SL84HD, SL84LL

SELECT PIN & BARREL HINGES
Full Surface (Click Image Below to Go to Category)	Half Surface (Click Image Below to Go to Category)	Full Mortise/Concealed (Click Image Below to Go to Category)	Half Mortise (Click Image Below to Go to Category)	Swing Clear (Click Image Below to Go to Category)	Toilet Partition (Click Image Below to Go to Category)
SL302	SL303	SL200	SL306	SL310	SL402TP
SL309		SL300		SL311	SL902TP
		SL305
		SL315
		SL3500