Select SL18 SD Standard Duty Concealed Geared Continous Hinges

 

Select SL18 SD Standard Duty Concealed Geared Continous Hinges | Select SL18 Piano Hinges

The Select SL18 SD Concealed Geared Continous Hinge Beveled Frame Leaf for weatherstripping or smoke seal is a high quality hinge certified by the US Department of State, with its 60 minute certification. The Select SL18 SD hinge is designed for use on doors with 1/8" door inset and 1-3/4'' door thickness. Apart from the Select SL18 SD standard duty hinge, the Select SL18 HD heavy duty hinge and the Select SL18 LL heavy duty hinge are also available in this series.

The Select SL18-SD hinges conform to Select's high quality and high performance criterias. The Select SL18SD hinges fit your door better and last longer. These Select SL18 piano hinges have demonstrated longevity, while at the same time reducing operating and maintenance costs.

Apart from standard lengths and finishes, custom lengths and finishes are also available on the Select SL18SD hinge. Call us today for more information. Call us if you require electric prep on your Select SL18-SD hinge.

Select SL18 SD Cross Reference - Roton 780-111, Pemko FMSLI, McKinney MCK14

Features of the Select SL18SD

MATERIAL:

Extruded 6063 T6 aluminum alloy with self-lubricating polyester thrust bearings.

LENGTHS:

The Select SL18 SD is offered in 83", 85", 95" and 120" lengths standard for nominal door heights. Custom lengths are available.

LOAD/FREQUENCY RATINGS:

For 1-3/4" doors. 48" max. door width in 16 gauge hollow metal (min.) or 1/8" aluminum (min.).

Standard Duty — Tested per BHMA standards for medium-frequency doors up to 200 lb. without frame or door reinforcement.

Heavy Duty — Tested per BHMA standards. Up to 200 lb. doors (high-frequency) and up to 400 lb. doors (medium-frequency) without frame or door reinforcement; up to 600 lb. doors (low-frequency) with the use of Rivnuts in the frame and door. Click here to view SL18 HD.

Heavy Duty (LL) — Our HD hinge with additional fastener holes for low-frequency doors up to 1,000 lb., including most lead-lined doors. Rivnuts are recommended in the frame and door on extremely tall, extremely heavy or wide doors. Click here to view SL18 LL.

FINISHES:

All Select SL18-SD hinges are stocked in Clear and Dark Bronze anodized aluminum. Custom anodized or painted finishes are available. Product painted or anodized in the field voids the SELECT hinge warranty.

CLOSERS:

Conventional overhead surface, concealed sliding arm overhead or floor closers may be used with SELECT hinges. Pivot-type floor closers (with a fixed, conflicting center pivot) must be replaced.

ORDER:

Specify length, finish and standard duty (SD), heavy duty (HD) or heavy duty with additional fastener holes (LL). Also, specify door and frame screw applications. 12-24 x 3/4" self-drilling, thread-forming 410SS Phillips undercut flathead screws are provided as a standard pack unless otherwise specified. Wood and thread-forming screws also available. Security screws optional at extra cost.

AVAILABLE ELECTRIC PREPS:

EPT, ATW, EMS, CTW4, CTW5, CTW8, CTW10, CTW12, CMG, AP and RP. For CTW12 prep, please contact us for engineering approval.

BHMA CERTIFICATION:

Select SL18SD, Select SL18HD and Select SL18LL geared continuous hinges conform to BHMA Standard ANSI/BHMA A156.26-2006 Grade 1.

Select SL18-SD Screw Count

Select SL18-SD Part Number Interchange | Select SL18 Piano Hinges Cross Reference

Select Hinges Product Selection Table

SELECT GEARED HINGES
Full Surface (Click Image Below to Go to Category)	Half Surface (Click Image Below to Go to Category)	Full Mortise/Concealed (Click Image Below to Go to Category)	Half Mortise (Click Image Below to Go to Category)	Swing Clear (Click Image Below to Go to Category)	Wide Throw (Click Image Below to Go to Category)	Toilet Partition (Click Image Below to Go to Category)
SL21SD,SL21HD	SL53HD	SL11SD, SL11HD, SL11LL	SL52HD	SL41HD, SL41LL	SL40HD	SL60/SL62
SL57SD,SL57HD	SL54HD	SL12HD
	SL77HD	SL14SD,SL14HD
		SL18SD,SL18HD,SL18LL
		SL24SD,SL24HD,SL24LL
		SL26LL
		SL27LL
		SL31HD
		SL38SD
		SL44HD
		SL48HD
		SL71HD
		SL84HD, SL84LL

SELECT PIN & BARREL HINGES
Full Surface (Click Image Below to Go to Category)	Half Surface (Click Image Below to Go to Category)	Full Mortise/Concealed (Click Image Below to Go to Category)	Half Mortise (Click Image Below to Go to Category)	Swing Clear (Click Image Below to Go to Category)	Toilet Partition (Click Image Below to Go to Category)
SL302	SL303	SL200	SL306	SL310	SL402TP
SL309		SL300		SL311	SL902TP
		SL305
		SL315
		SL3500