Select SL41 LL Heavy Duty Swing Clear Geared Continous Hinges | Select SL41 LL Swing Clear Offset Piano Hinges
The Select SL41 LL heavy duty swing clear geared continous hinges are grade 1 hinges, designed for 1-3/4'' thick doors. The Select SL41-LL requires a 2-1/4" frame face for full rotation clearance. This Select SL41-LL is a good alternative to the Roton 780-041LL hinge.
Some of the features of the Select SL41 LL swing clear piano offset hinges are -
1. Safety - The Select SL41-LL has the highest level certification from the US Department of State. The Select SL41-LL hinge deflected bullets in the Ballistic Resistance Test and withstood sledgehammers, wedges and other tools in the Forced Entry Test. This hinge has been approved for use in U.S. embassies overseas.
2. Quality - The Select SL41LL is ANODIZED AFTER MACHINING - this process delivers superior wear, durability and life and inhibits corrosion. Fasteners are coated, which provide additional corrosion protection. Also, hinge failure of the Select SL41LL are minimal, if at all, which saves time and money that would other wise be required to replace the hinge.
3. Performance - Lubrication eliminates the need for periodic maintenance, while giving quiet performance. The Select SL41LL hinge works in high traffic applications.
We at locksandsafes.com sell the Select SL41 LL swing clear offset piano hinges at very attractive rates. Call us now if you have any questions regarding the Select SL41 LL hinges, or any other Select products.
Features of the Select SL41LL
Extruded 6063 T6 aluminum alloy with self-lubricating polyester thrust bearings.
Select SL41 LL is available in 83", 85", 95" and 120" lengths standard for nominal door heights. Custom lengths are available.
For 1-3/4" doors. 48" max. door width in 16 gauge hollow metal (min.) or 1/8" aluminum (min.).
Heavy Duty — Tested per BHMA standards. Up to 200 lb. doors (high-frequency) and up to 400 lb. doors (medium-frequency) without frame or door reinforcement; up to 600 lb. doors (low-frequency) with the use of Rivnuts in the frame and door.
Heavy Duty (LL) — Our HD hinge with additional fastener holes for low-frequency doors up to 1,000 lb., including most lead-lined doors. Rivnuts are recommended in the frame and door on extremely tall, extremely heavy or wide doors.
All Select SL41LL hinges are stocked in Clear and Dark Bronze anodized aluminum. Custom anodized or painted finishes are available. Product painted or anodized in the field voids the SELECT hinge warranty.
Conventional overhead surface, concealed sliding arm overhead or floor closers may be used with SELECT hinges. Pivot-type floor closers (with a fixed, conflicting center pivot) must be replaced.
Specify length, finish and heavy duty (HD) or heavy duty with additional fastener holes (LL). Also, specify door and frame screw applications. 12-24 x 3/4" self-drilling, thread-forming 410SS Phillips undercut flathead screws are provided as a standard pack unless otherwise specified. Wood and thread-forming screws also available. Security screws optional at extra cost.
AVAILABLE ELECTRIC PREPS:
EPT, EMS and CMG. For EPT prep on this hinge model, please consult us for engineering approval.
Select SL41 HD and Select SL41 LL geared continuous hinges conform to BHMA Standard ANSI/BHMA A156.26-2006 Grade 1.
Select SL41-LL Screw Count
Part Number Interchange | Select SL41 LL Swing Clear Geared Continous Hinges