Select SL71 HD Heavy Duty Concealed Edge Mount Hinges

 

Select SL71 HD Heavy Duty Concealed Edge Mount Hinges

The Select SL71 HD heavy duty concealed safety hinge (when used without frame stop), provides clearance sufficient to avoid the pinching of fingers. The Select SL71 HD is a flush mounted, Grade 1 hinge designed for installation on doors which are 1-3/4" thick. The Select SL71 HD can be considered a close substitute to the Roton 780-113HD, the Pemko FMSLISFHD and the ABH A130HD hinges. If you are looking to buy cheap select hinges such the Select SL71-HD, then look no further. Locksandsafes.com offers Select Hinges at some of the best prices. Locksandsafes.com is your answer when you want to buy the Select SL71 HD concealed edge mount hinges.

The Select SL71HD heavy duty hinge is offered in two lengths - 83" and 95". It is also offered in two colors - Clear Anodized Alumnium and Bronze Anodized Aluminium. The Select 71HD hinge conforms to the famed Select quality and warranty.

We say it again - Buy Select SL71-HD concealed safety hinge at low prices from locksandsafes.com. We are your one stop solution to all Select Hinges including the Select SL71 HD concealed edge mount hinges.

Features of the Select SL71HD

MATERIAL:

Extruded 6063 T6 aluminum alloy with self-lubricating polyester thrust bearings.

LENGTHS:

Select SL71-HD is available in 83"and 95" lengths standard for nominal door heights. Hinges can be cut to shorter lengths. Longer hinges are not available.

LOAD/FREQUENCY RATING:

For 1-3/4" doors. 48" max. door width in 16 gauge hollow metal (min.) or 1/8" aluminum (min.).

Heavy Duty — Tested per BHMA standards. Up to 200 lb. doors (high-frequency) and up to 400 lb. doors (medium-frequency) without frame or door reinforcement; up to 600 lb. doors (low-frequency) with the use of Rivnuts in the frame and door.

FINISHES:

All Select SL71HD hinges are stocked in Clear and Dark Bronze anodized aluminum. Custom anodized or painted finishes are available. Product painted or anodized in the field voids the SELECT hinge warranty.

CLOSERS:

Conventional overhead surface, concealed sliding arm overhead or floor closers may be used with SELECT hinges. Pivot-type floor closers (with a fixed, conflicting center pivot) must be replaced.

ORDER:

Specify length, finish and heavy duty (HD). Also, specify door and frame screw applications. 12- 24 x 3/4" self-drilling, thread-forming 410SS Phillips undercut flathead screws are provided as a standard pack unless otherwise specified. Wood and thread-forming screws also available. Security screws optional at extra cost.

BHMA CERTIFICATION:

Select SL71HD geared continuous hinges conform to BHMA Standard ANSI/BHMA A156.26-2006 Grade 1.

Select SL71-HD Screw Count

Part Number Interchange for the Select SL71 HD Concealed Edge Mount Hinges

Please note - The below cross references are not equivalent hinge but possible SELECT hinge substitution depending on application.

Select Hinges Product Selection Table

SELECT GEARED HINGES
Full Surface (Click Image Below to Go to Category)	Half Surface (Click Image Below to Go to Category)	Full Mortise/Concealed (Click Image Below to Go to Category)	Half Mortise (Click Image Below to Go to Category)	Swing Clear (Click Image Below to Go to Category)	Wide Throw (Click Image Below to Go to Category)	Toilet Partition (Click Image Below to Go to Category)
SL21SD,SL21HD	SL53HD	SL11SD, SL11HD, SL11LL	SL52HD	SL41HD, SL41LL	SL40HD	SL60/SL62
SL57SD,SL57HD	SL54HD	SL12HD
	SL77HD	SL14SD,SL14HD
		SL18SD,SL18HD,SL18LL
		SL24SD,SL24HD,SL24LL
		SL26LL
		SL27LL
		SL31HD
		SL38SD
		SL44HD
		SL48HD
		SL71HD
		SL84HD, SL84LL

SELECT PIN & BARREL HINGES
Full Surface (Click Image Below to Go to Category)	Half Surface (Click Image Below to Go to Category)	Full Mortise/Concealed (Click Image Below to Go to Category)	Half Mortise (Click Image Below to Go to Category)	Swing Clear (Click Image Below to Go to Category)	Toilet Partition (Click Image Below to Go to Category)
SL302	SL303	SL200	SL306	SL310	SL402TP
SL309		SL300		SL311	SL902TP
		SL305
		SL315
		SL3500