Command Access
Command Access LPM193EUxEL Grade 1 Complete Mortise Lock w/ Motorized Latch Retraction | EU Storeroom Function Latch Control x EL Storeroom Function Lever Control | LPM 190 Series Mortise Lock | Schlage L9000 Retrofit
Don't see the quantity, finish, or function you are looking for? We can mix, match and "BUILD" the item option set you are looking for - Just call us at 860-537-1328 and our sales staff will assist !
FUNCTION
LPM193EUxEL (EU Storeroom x EL Storeroom)
Note
Fail Safe - Electrically Locked (EL): Fail safe products are unlocked when power is removed. Power is applied to lock the door.
Fail Secure - Electrically Unlocked (EU): Fail secure products are locked when power is removed. Power is applied to unlock the door.
Latchbolt Control
Motorized Latchbolt retracted by key outside or inside Applied power electronically (EU) retracts latchbolt for push/pull operation.
Lever Control
Outside Lever: EL - locked electronically: Applied power prohibits Outside lever from retracting latchbolt.
Inside Lever: Always free egress. Latchbolt retracted by key outside or inside. Applied power electronically (EU only) retracts latchbolt for push/pull operation.
FEATURES
• Built-in Smart Module: Simplifies installation, low current draw & provides latch sensing status.
• Rated for continuous duty - Auto re-engage if latch is pulled from held back position
• Up to 300’ wire run with 2-18ga wire - Long wire runs provides installer with convenience of placing the Command locking hardware power supply in a centralized location; i.e. the same closet as the access control panel
• 8’ cable with Quick Connect to easily connect to power supply lead
• Built-in REX & LBM switches available.
• Field-Handable - Direct Retrofit for Schlage L9000 series
• 3-year “no hassle” warranty
SPECIFICATIONS
Voltage - Latch Retraction
• Voltage range – 24 +/- 10%
• System protection – unit shutdown when voltage exceeds 28VDC
• Standard - Average Current Peak: 1A, Average Current Hold: 300mA
Voltage - Lever Control
• Operating Voltage – Specify 12 or 24VAC/DC (+/- 10%)
• Amperage - 24v = 350mA or 12V = 700mA
• Solenoid coil resistance – 24v = 69Ω
Wire Run
• 300’ with 18ga wire
Command Access Mechanical Mortise Lock Product Information Guide
PART # | Function | LINK TO COMPLETE LOCK | LINK TO CHASSIS ONLY |
---|---|---|---|
ML1010 |
Passage |
||
ML1040 |
Privacy |
||
ML1050 |
Office |
||
ML1053 |
Entry |
||
ML1070 |
Classroom |
||
ML1080 |
Storeroom |
||
ML1082 |
Institutional |
Command Access Electric Mortise Lock Product Information Guide
SERIES | PART # | RETROFIT BRAND/PART # | MOTOR DRIVEN OR SOLENOID? | LINK TO COMPLETE LOCK | LINK TO CHASSIS ONLY | LINK TO MODIFICATION KIT |
---|---|---|---|---|---|---|
ML1 |
ML170 (Classroom) |
Schlage L9070 |
Solenoid |
N/A |
||
ML180 (Storeroom) |
Schlage L9080 |
Solenoid |
N/A |
|||
ML182 (Institutional) |
Schlage L9082 |
Solenoid |
N/A |
|||
ML1480 (Entrance w/Deadbolt) |
Schlage L9453 |
Solenoid |
N/A |
|||
ML1482 (Institutional w/Deadbolt) |
Schlage L9000 |
Solenoid |
N/A |
|||
ML1485 (Privacy w/Deadbolt) |
Schlage L9440 |
Solenoid |
N/A |
|||
ML19092 (Storeroom) |
Schlage L9080 |
Motor Driven
|
N/A |
|||
ML19095 (Institutional) |
Schlage L9082 |
Motor Driven |
N/A |
|||
MRC1 |
MRC135D |
Best 35/45 Storeroom |
Solenoid |
N/A |
N/A |
|
MRC135W |
Best 35/45 Institutional |
Solenoid |
N/A |
N/A |
||
MRC18080 |
Cal Royal 8000 Storeroom |
Solenoid |
N/A |
N/A |
||
MRC180802 |
Cal Royal 8000 Institutional |
Solenoid |
N/A |
N/A |
||
MRC105/03 |
Corbin Russwin 2000 Storeroom |
Solenoid |
N/A |
N/A |
||
MRC104/01 |
Corbin Russwin 2000 Institutional |
Solenoid |
N/A |
N/A |
||
MRC181/51 |
Falcon MA Storeroom |
Solenoid |
N/A |
N/A |
||
MRC121/11 |
Falcon MA Institutional |
Solenoid |
N/A |
N/A |
||
LPM190 |
LPM1910EU Passage |
Schlage L9000 |
Motor Driven |
N/A |
||
LPM190EU Storeroom |
Schlage L9000 |
Motor Driven |
N/A |
|||
LPM192EU Institutional |
Schlage L9000 |
Motor Driven |
N/A |
|||
LPM193EU Storeroom x EL Storeroom |
Schlage L9000 |
Motor Driven |
N/A |
|||
LPM194EU Storeroom x EU Storeroom |
Schlage L9000 |
Motor Driven |
N/A |
|||
LPM195EU Institutional x EL Storeroom |
Schlage L9000 |
Motor Driven |
N/A |
|||
LPM196EU Institutional x EU Storeroom |
Schlage L9000 |
Motor Driven |
N/A |
|||
LPM197EU Institutional x EL Institutional |
Schlage L9000 |
Motor Driven |
N/A |
|||
LPM198EU Institutional x EU Institutional |
Schlage L9000 |
Motor Driven |
N/A |
|||
ML45 |
ML45D Storeroom |
Best 45H |
Solenoid |
MDML45 Modification Kit |
||
ML808 |
ML8080 Storeroom |
Cal Royal M |
Solenoid |
N/A |
MDML808 Modification Kit |
|
ML05 |
ML05 Storeroom |
Corbin Russwin ML2000 |
Solenoid |
N/A |
MDML05 Modification Kit |
|
ML37 |
ML371 Storeroom |
Sargent 8237 |
Solenoid |
N/A |
MDML37 Modification Kit |
|
ML80 |
ML70 Classroom |
Schlage L9000 |
Solenoid |
MDML80 Modification Kit |
||
ML90-M |
ML92-M Storeroom |
Schlage L9000 |
Motor Driven |
MDML90-M Modification Kit |
||
ML90 |
ML91 Storeroom |
Yale 8000 |
Solenoid |
MDML90 Modification Kit |
||
LPM18x |
LPM110EU Passage |
Schlage L9000 |
Solenoid |
N/A |
N/A |
|
LPM180EU Storeroom |
Schlage L9000 |
Solenoid |
N/A |
N/A |
||
LPM182EU Institutional |
Schlage L9000 |
Solenoid |
N/A |
N/A |
||
LPM183EU Storeroom x EL Storeroom |
Schlage L9000 |
Solenoid |
N/A |
N/A |
||
LPM184EU Storeroom x EU Storeroom |
Schlage L9000 |
Solenoid |
N/A |
N/A |
||
LPM185EU Institutional x EL Storeroom |
Schlage L9000 |
Solenoid |
N/A |
N/A |
||
LPM186EU Institutional x EU Storeroom |
Schlage L9000 |
Solenoid |
N/A |
N/A |
||
LPM187EU Institutional x EL Institutional |
Schlage L9000 |
Solenoid |
N/A |
N/A |
||
LPM188EU Institutional x EU Institutional |
Schlage L9000 |
Solenoid |
N/A |
N/A |
Command Access LPM193EUxEL Grade 1 Complete Mortise Lock w/ Motorized Latch Retraction | EU Storeroom Function Latch Control x EL Storeroom Function Lever Control | LPM 190 Series Mortise Lock | Schlage L9000 Retrofit
The Command Access LPM190 series motorized latch retraction mortise lock utilizes a high-quality Grade 1 chassis built to withstand years of abuse. This unique model brings latch retraction to a standard mortise lockset & is the perfect solution for push-pull conditions, handicap access, single occupancy restroom applications, and automatic operators where panic devices are unnecessary. It utilizes a CAT-designed custom motor assembly to maximize the pulling force, lower surge, allowing long wire runs and multiple locks on one power supply. This mortise lock uses standard ‘type 86’ door prep and is a direct retrofit to Schlage L9000 compatible trim. Available with lever control solenoid for latch retraction x lever control allowing for multiple speciality functions.
FUNCTION
LPM193EUxEL (EU Storeroom x EL Storeroom)
Note
Fail Safe - Electrically Locked (EL): Fail safe products are unlocked when power is removed. Power is applied to lock the door.
Fail Secure - Electrically Unlocked (EU): Fail secure products are locked when power is removed. Power is applied to unlock the door.
Latchbolt Control
Motorized Latchbolt retracted by key outside or inside Applied power electronically (EU) retracts latchbolt for push/pull operation.
Lever Control
Outside Lever: EL - locked electronically: Applied power prohibits Outside lever from retracting latchbolt.
Inside Lever: Always free egress. Latchbolt retracted by key outside or inside. Applied power electronically (EU only) retracts latchbolt for push/pull operation.
FEATURES
• Built-in Smart Module: Simplifies installation, low current draw & provides latch sensing status.
• Rated for continuous duty - Auto re-engage if latch is pulled from held back position
• Up to 300’ wire run with 2-18ga wire - Long wire runs provides installer with convenience of placing the Command locking hardware power supply in a centralized location; i.e. the same closet as the access control panel
• 8’ cable with Quick Connect to easily connect to power supply lead
• Built-in REX & LBM switches available.
• Field-Handable - Direct Retrofit for Schlage L9000 series
• 3-year “no hassle” warranty
SPECIFICATIONS
Voltage - Latch Retraction
• Voltage range – 24 +/- 10%
• System protection – unit shutdown when voltage exceeds 28VDC
• Standard - Average Current Peak: 1A, Average Current Hold: 300mA
Voltage - Lever Control
• Operating Voltage – Specify 12 or 24VAC/DC (+/- 10%)
• Amperage - 24v = 350mA or 12V = 700mA
• Solenoid coil resistance – 24v = 69Ω
Wire Run
• 300’ with 18ga wire
Command Access Mechanical Mortise Lock Product Information Guide
PART # | Function | LINK TO COMPLETE LOCK | LINK TO CHASSIS ONLY |
---|---|---|---|
ML1010 |
Passage |
||
ML1040 |
Privacy |
||
ML1050 |
Office |
||
ML1053 |
Entry |
||
ML1070 |
Classroom |
||
ML1080 |
Storeroom |
||
ML1082 |
Institutional |
Command Access Electric Mortise Lock Product Information Guide
SERIES | PART # | RETROFIT BRAND/PART # | MOTOR DRIVEN OR SOLENOID? | LINK TO COMPLETE LOCK | LINK TO CHASSIS ONLY | LINK TO MODIFICATION KIT |
---|---|---|---|---|---|---|
ML1 |
ML170 (Classroom) |
Schlage L9070 |
Solenoid |
N/A |
||
ML180 (Storeroom) |
Schlage L9080 |
Solenoid |
N/A |
|||
ML182 (Institutional) |
Schlage L9082 |
Solenoid |
N/A |
|||
ML1480 (Entrance w/Deadbolt) |
Schlage L9453 |
Solenoid |
N/A |
|||
ML1482 (Institutional w/Deadbolt) |
Schlage L9000 |
Solenoid |
N/A |
|||
ML1485 (Privacy w/Deadbolt) |
Schlage L9440 |
Solenoid |
N/A |
|||
ML19092 (Storeroom) |
Schlage L9080 |
Motor Driven
|
N/A |
|||
ML19095 (Institutional) |
Schlage L9082 |
Motor Driven |
N/A |
|||
MRC1 |
MRC135D |
Best 35/45 Storeroom |
Solenoid |
N/A |
N/A |
|
MRC135W |
Best 35/45 Institutional |
Solenoid |
N/A |
N/A |
||
MRC18080 |
Cal Royal 8000 Storeroom |
Solenoid |
N/A |
N/A |
||
MRC180802 |
Cal Royal 8000 Institutional |
Solenoid |
N/A |
N/A |
||
MRC105/03 |
Corbin Russwin 2000 Storeroom |
Solenoid |
N/A |
N/A |
||
MRC104/01 |
Corbin Russwin 2000 Institutional |
Solenoid |
N/A |
N/A |
||
MRC181/51 |
Falcon MA Storeroom |
Solenoid |
N/A |
N/A |
||
MRC121/11 |
Falcon MA Institutional |
Solenoid |
N/A |
N/A |
||
LPM190 |
LPM1910EU Passage |
Schlage L9000 |
Motor Driven |
N/A |
||
LPM190EU Storeroom |
Schlage L9000 |
Motor Driven |
N/A |
|||
LPM192EU Institutional |
Schlage L9000 |
Motor Driven |
N/A |
|||
LPM193EU Storeroom x EL Storeroom |
Schlage L9000 |
Motor Driven |
N/A |
|||
LPM194EU Storeroom x EU Storeroom |
Schlage L9000 |
Motor Driven |
N/A |
|||
LPM195EU Institutional x EL Storeroom |
Schlage L9000 |
Motor Driven |
N/A |
|||
LPM196EU Institutional x EU Storeroom |
Schlage L9000 |
Motor Driven |
N/A |
|||
LPM197EU Institutional x EL Institutional |
Schlage L9000 |
Motor Driven |
N/A |
|||
LPM198EU Institutional x EU Institutional |
Schlage L9000 |
Motor Driven |
N/A |
|||
ML45 |
ML45D Storeroom |
Best 45H |
Solenoid |
MDML45 Modification Kit |
||
ML808 |
ML8080 Storeroom |
Cal Royal M |
Solenoid |
N/A |
MDML808 Modification Kit |
|
ML05 |
ML05 Storeroom |
Corbin Russwin ML2000 |
Solenoid |
N/A |
MDML05 Modification Kit |
|
ML37 |
ML371 Storeroom |
Sargent 8237 |
Solenoid |
N/A |
MDML37 Modification Kit |
|
ML80 |
ML70 Classroom |
Schlage L9000 |
Solenoid |
MDML80 Modification Kit |
||
ML90-M |
ML92-M Storeroom |
Schlage L9000 |
Motor Driven |
MDML90-M Modification Kit |
||
ML90 |
ML91 Storeroom |
Yale 8000 |
Solenoid |
MDML90 Modification Kit |
||
LPM18x |
LPM110EU Passage |
Schlage L9000 |
Solenoid |
N/A |
N/A |
|
LPM180EU Storeroom |
Schlage L9000 |
Solenoid |
N/A |
N/A |
||
LPM182EU Institutional |
Schlage L9000 |
Solenoid |
N/A |
N/A |
||
LPM183EU Storeroom x EL Storeroom |
Schlage L9000 |
Solenoid |
N/A |
N/A |
||
LPM184EU Storeroom x EU Storeroom |
Schlage L9000 |
Solenoid |
N/A |
N/A |
||
LPM185EU Institutional x EL Storeroom |
Schlage L9000 |
Solenoid |
N/A |
N/A |
||
LPM186EU Institutional x EU Storeroom |
Schlage L9000 |
Solenoid |
N/A |
N/A |
||
LPM187EU Institutional x EL Institutional |
Schlage L9000 |
Solenoid |
N/A |
N/A |
||
LPM188EU Institutional x EU Institutional |
Schlage L9000 |
Solenoid |
N/A |
N/A |
- Option:Choose Finish (Click here to see our Detailed Door Hardware Finish Guide):
- https://blog.locksandsafes.com/2020/07/28/lock-and-door-hardware-finishes/
- Option:Choose Keyway (What is it? Click here to see our Lock Cylinder and Keyway Guide for more information):
- https://blog.locksandsafes.com/2021/03/17/lock-cylinder-and-keyway-guide/
- Option:Choose REX Switch Option (What is a REX Switch Option? Click here to know more):
- https://blog.locksandsafes.com/2021/09/06/request-to-exit-explained/