Command Access MLRK1-JAC12 | Motorized Latch Retraction (MLR) Kit for Jackson 1285/1296, Command Access PD16 & Kawneer 1686/1786 Series Exit Device

FEATURES

• MM4 Smart Module: On board diagnostics with audible feedback for adjustment and power issues

• “PTS”: 5 second electronic adjustment for easy post installation adjustment

• Electric dogging rated for continuous duty - Auto re-engage if push pad is pulled from dogged position

• Low Current Draw - Field switchable to a “Low Current” or “High Torque” mode

• Up to 300’ wire run with 2-18ga wire - Long wire runs provides installer with convenience of placing the Command locking hardware power supply in a centralized location; i.e. the same closet as the access control panel

• 8’ cable with Quick Connect for MM4 module to easily connect to power supply lead.

• Optional add on: Pre-prepped for Request to Exit (REX) to be built-in or easy field add.

• 3-year “no hassle” warranty

SPECIFICATIONS

Voltage:

• Voltage range – 24 to 28 VDC

• System protection – unit shutdown when voltage exceeds 28VDC

• Standard - Average Current Peak: 1.3A, Average Current Hold: 170mA

• High Torque - Average Current Peak: 2A, Average Current Hold: 250mA

• PTS adjustment – approx. 1/4”

Wire Run:

• 300’ with 18ga wire

Product Details:

• Weight: 2 Lbs

Device Cutdown Details:

• 36” - 3”

• 48” - 15”

MLRK1-JAC12 Matrix

The MLRK1-JAC12 will work in new installations and as a replacement for installations with existing electrifications, matrix lists available options.

Command Access MLRK1 Series Latch Retraction Kits Product Reference Chart

Command Access MLRK1-JAC12 | Motorized Latch Retraction (MLR) Kit for Jackson 1285/1296, Command Access PD16 & Kawneer 1686/1786 Series Exit Device

The MLRK1-JAC12 is a high quality, cost effective method of converting an Jackson 1285/1295, & PD16 series device to an electrified latch pullback exit device. The next generation electromechanical drive offers superior performance to its predecessor. It utilizes a patent pending custom ball screw assembly and CAT designed custom stepper motor to provide remarkably efficient and reliable results. Since our kit retracts the push pad, the device can be electrically dogged allowing the device to remain in a push/pull state, for as long as is desired. Patent Pending Push to Start (PTS)Technology allows for an easy post-installation adjustment of the latch/latches. Last but not least, features an updated MM4 module with 2 different torque settings from energy conscious to high torque to get the tough jobs done!

FEATURES

• MM4 Smart Module: On board diagnostics with audible feedback for adjustment and power issues

• “PTS”: 5 second electronic adjustment for easy post installation adjustment

• Electric dogging rated for continuous duty - Auto re-engage if push pad is pulled from dogged position

• Low Current Draw - Field switchable to a “Low Current” or “High Torque” mode

• Up to 300’ wire run with 2-18ga wire - Long wire runs provides installer with convenience of placing the Command locking hardware power supply in a centralized location; i.e. the same closet as the access control panel

• 8’ cable with Quick Connect for MM4 module to easily connect to power supply lead.

• Optional add on: Pre-prepped for Request to Exit (REX) to be built-in or easy field add.

• 3-year “no hassle” warranty

SPECIFICATIONS

Voltage:

• Voltage range – 24 to 28 VDC

• System protection – unit shutdown when voltage exceeds 28VDC

• Standard - Average Current Peak: 1.3A, Average Current Hold: 170mA

• High Torque - Average Current Peak: 2A, Average Current Hold: 250mA

• PTS adjustment – approx. 1/4”

Wire Run:

• 300’ with 18ga wire

Product Details:

• Weight: 2 Lbs

Device Cutdown Details:

• 36” - 3”

• 48” - 15”

MLRK1-JAC12 Matrix

The MLRK1-JAC12 will work in new installations and as a replacement for installations with existing electrifications, matrix lists available options.

Command Access MLRK1 Series Latch Retraction Kits Product Reference Chart