Norton HM51 Series 3/4" Offset Hung Floor Closer | Norton Shallow Depth Floor Closer For Hollow Metal Doors

Norton HM51 Series 3/4" Offset Hung Floor Closer | Norton Shallow Depth Floor Closer For Hollow Metal Doors

The HM51 is a 3/4" offset-hung, shallow-depth floor closer designed for hollow metal door and frame installation for interior doors weighing up to 250lbs.

APPLICATION

• Interior Doors

• 1-3/4" Hollow Metal Doors & Frames

• Weight to 250 lbs.

• Door Width up to 4'0" (1219mm)

FEATURES

• Single Acting

• Handed

• Designed for stock hollow metal doors and frames with standard weight 4-1/2" hinge preparation

• Three special steel 4-1/2" ball bearing standard weight hinges with 3/4" offset are included. Doors over 90" in height warrant an additional hinge.

• Order spring sizes 3 through 5:

- Model HM5103: 36" (914mm) Door Width

- Model HM5104: 42" (1067mm) Door Width

- Model HM5105: 48" (1219mm) Door Width

• Surface mounted bottom arm with thru bolts

• Available non-hold open (NBC) or automatic hold open (ABC) specify 90° or 105°

• Doors will swing 5° beyond hold open point

• Separate and independent valves for closing speed, latch speed and backcheck

• Available with floor plate or threshold installation (floor plate shown)

• Cycolac, rust proof cement case

• Interchangeable spindle adapters

• Furnished with 1/2 wood and full machine screws

COMPLIANCE

• For fire rated openings (up to 3-hour assemblies), prefix “F”. This package will be supplied with three steel hinges and a non-hold open closer

Norton HM51 Technical Information