Sargent LS8600 | 80 Series Grade 1 Low Profile Center & Top Latch Concealed Vertical Rod for Single Door Applications

Sargent LS8600 | 80 Series Grade 1 Low Profile Center & Top Latch Concealed Vertical Rod for Single Door Applications

Features

• The security of a stainless steel center bolt, concealed top bolt and a low profile device for single doors without bottom rod issues

• Devices are ANSI/BHMA A156.3 - Grade 1

• UL10C (Fire) and UL305 (Panic) listed

• 1-1/2" total projection from face of door

• Center and top latching

• No visible active chassis

• Center latchbolt adjustable for up to 3/8" (9mm) door gap

• Top case latchbolt projection adjustable through top case

• Tripping potential removed - no bottom strike

• All functions determined by outside trim (ET Trim only) Door Type Factory prepped metal doors for LP & LR devices

• Concealed rods for security and aesthetics

Specifications

Door Type

Factory prepped metal doors for LP & LR devices

Door Thickness

1-3/4" (44mm) doors only with 2-3/4" (70mm) backset

Stile

4-1/2" (114mm) minimum stile width

Rail sizes as determined by door width

Rails are available in 3 sizes, use door width to determine size needed.

• L Rail for 36" door width no cutting required

• M Rail for 42" to 44" door width no cutting required

• N Rail - 46" to 48" door width no cutting required

Strike

650 Top Strike & C7710 Mortise Strike (Panic and Fire Rated)

Dogging Feature

Hex key dogging standard on non fired rated devices; specify 16- for cylinder dogging (#41 cylinder supplied)

Mounting Fasteners

Supplied standard with machine screws

Top & Center Bolt

Stainless steel

Device Centerline from Finished Floor

41" (1041 mm) for Standard Applications

Door/Opening Height

Must be specified - 120" (3048mm) Max Door Opening

Center Case Dimensions

8-3/8" (213mm) x 2-5/8" (67mm)

Projection

Pushbar Neutral – 1-1/2" (38mm)

Pushbar Depressed – 5/8" (15mm)