Interconnected Locks - Single Cylinder - Entrance Lock | Schlage S210PD

Looking for other S200 Lock Functions. Below is a list of all the different S200 Series Locks

(Note: Click on an image to take you to that lock listing)

Schlage S210PD - Interconnected Locks - Single Cylinder - Entrance Lock (Schlage S200 Series)

Note: Left Hand Handing is the same as Right Hand Reverse Handing and Right Hand Handing is the same has Left Hand Reverse Handing. See handing chart for clarification. Click here to see our Door Handing guide.

The S200 comes with a standard strike of 1 1/8" x 2 3/4", Square corner, box for the deadbolt and 1 1/8" x 2 3/4", Square corner, T-strike, box for the deadlatch. (See below for more strike options and call us if you need lock with different strike).

Symbol Description

Entrance, single locking Function

• Deadbolt operated by key from outside or by turning unit from inside

• Bolt automatically deadlocks when fully thrown

• Latchbolt retracted by lever from either side

• Turn inside lever to simultaneously retract deadbolt and latchbolt for immediate exit

About S200 Interconnected Lock

When it comes to quick, easy egress and dependable security, Schlage S200 Series interconnected locks get the job done. Designed for applications ranging from military housing to multi-family and small hotel/motel buildings, the S200 Series is a lock you can depend on.

ƒ Heat-treated steel locking components for extra strength

ƒ Independent heavy-duty lever torsion springs for durability and long life

ƒ Non-handed levers for easy field installation

ƒ Extra-strong Everest 29™-patented keys standard for commercial applications

Detailed Look

Specifications

Handing: Not handed, except Flair design.

Door thickness: 1 3⁄8" to 2" (35 mm-51 mm).

Backset: 2 3⁄8" (60 mm) Standard, 2 3⁄4" (70 mm) and 5" (127 mm) available.

Fronts: Brass or bronze. 11 ⁄8" x 21 ⁄4" (29 mm x 57 mm) square corner, beveled, for 2 3⁄4" backset standard.

Lock chassis: Steel, zinc dichromate plated for corrosion resistance.

Deadbolt: 1" (25 mm) throw with hardened steel roller, and 1" (25 mm) housings standard.

Latch bolt: Brass, chrome plated, 1/2" (13 mm) throw, deadlocking.

Exposed trim: Levers are zinc base, plated to match finish symbols. Roses, escutcheons, latch faceplates and strikes are wrought brass or bronze.

Strike: T-strike 11 ⁄8" x 2 3⁄4" (29 mm x 70 mm) x 11 ⁄8" (29 mm) lip to center with box standard. Optional strikes, lip lengths and ANSI strike box available.

Cylinder and keys: Commercial: 6-pin patented Everest 29 S123 keyway standard with two nickel silver keys per lock. Residential: 6-pin C keyway, keyed 5-pin.

Keying options: Interchangeable core and Primus high security cylinders. Master keying, grand master keying, and construction keying.

Warranty: Commercial: Three-year limited.

Escutcheon:

Finishes:

Click here to see our Definitive List of Door Hardware Finishes

Certifications

Federal

Meets FF-H-106C.

California State Reference Code (Formerly Title 19, California State Fire Marshal Standard)

All levers with a return to door of 1 ⁄2" (64 mm) or less comply.

UL / cUL

All locks listed for A label single doors, 2' x 8'.

Letter F and UL symbol on latch front indicate listing.

UL437 Listed locking cylinder optional: specify Primus 20-500 Series cylinder.

ADA compliant

Schlage Lock Company offers a wide selection of locks designed to meet the Americans With Disabilities Act.

(In compliance with the American National Standards Institute (ANSI A117.1) and the Americans with Disabilities Act (ADA), Schlage Lock Company offers a wide selection of locks designed for the needs of the physically challenged. This act is designed to provide protection for people with disabilities.)

Cylinders and Key Systems

Primus XP access control and high security cylinders

Primus XP access control and high security cylinders are available to add patented key control and varying degrees of geographical exclusivity to most Schlage 6-pin key systems, whether Everest 29 or Classic keyways.

In addition to a conventional pin tumbler mechanism, Primus cylinders incorporate a patented finger pin and sidebar design, providing a “dual-locking” cylinder that is virtually pick-proof. Resistance to drilling and other physical attack is optional by specifying 20-500 Series UL437 Listed cylinders.

Classic Primus XP cylinders are recommended for upgrading existing Classic key systems. Due to its extended patent life, the newly designed Everest 29 Primus XP is recommended for new key systems and for upgrading existing Everest key systems. Specify keyway to differentiate between Everest 29 and Classic. Example: C or CP (Classic) vs. S123 (Everest 29).

Standard cylinders

Schlage locks are provided with cylinders precision built to extremely close tolerances and the highest standards of accuracy. Using only solid brass plugs, extruded brass shells, phosphor bronze springs, nickel silver keys and pins, ensures long life and ease of operation. Conventional cylinders are available in Classic keyways or in the newly patented Everest 29 keyways. Specify keyway to differentiate between Everest 29 and Classic. Example: C (Classic) vs. S123 (Everest 29).

Interchangeable core

Schlage interchangeable core (IC) locksets allow immediate rekeying at the door simply by using the special control key to replace the core in seconds. IC locksets are available in all designs except Flair. Full size interchangeable cores can be integrated into any 5 or 6-pin Schlage key with no adverse affects on keying capacity. To order complete locks with full size cores, change suffix from PD to RD. Example: S251RD. To order locks less core, change suffix to JD. To order with full size construction core, change suffix to TD.

Cores, and IC cylinders and parts

Full size interchangeable cores - options

ƒ 6-pin conventional (standard)

ƒ Primus high security cylinder Full size core

Available in 606 and 626 finish only. Everest 29 S123 keyway standard for commercial; C keyway standard for residential.

IC cylinders for deadbolt (top) - options

Tailpiece not included.

ƒ Conventional core

ƒ Primus core

ƒ Primus XP core

ƒ Housing less core

Available in 605, 606, 609, 612, 613, 625 and 626 for housing; 606 and 626 for cores and cylinders only.

Everest 29 S123 keyway standard for commercial; C keyway standard for residential.

Latches and deadbolts

The standard universal backset deadlatch fits both 2 3⁄8" (60 mm) and 2 3⁄4" (70 mm) backsets. They are adjustable for flat or beveled edge doors and have a 1 ⁄2" (13 mm) throw. Orders for complete locks are provided with a G506-815 sleeve for 7 ⁄8" diameter latches installed in doors with 1" (25 mm) edge bore.

Deadbolts have 1 x 2 1/4", Square corner faceplate, 1" housing diameter, 1" throw deadbolt

Deadlatch has 1 x 2 1/4", Square corner faceplate, 1" housing diameter, 1/2" throw deadlatch

Strikes

Downloads

Click here to view Schlage S200 resources