Select SL14 HD Heavy Duty Concealed Geared Continous Hinges | Narrow Frame Leaf

 

Select SL14 HD Heavy Duty Concealed Geared Continous Hinges | Select Full Mortise Hinges

The Select SL14 HD Concealed Geared Continous Hinge with Narrow Frame Leaf for weatherstripping or smoke seal is a high quality hinge certified by the US Department of State, with its 60 minute certification. The Select SL14 HD heavy duty hinge is available in lengths of 83", 85", 95" and 120". These hinges are available in Clear Anodized and Bronze Anodized finishes. Custom lengths and custom anodized and painted finishes on these Select full mortise hinges are also available.

The SL14 HD hinge is available at extremely economical prices from locksandsafes.com. Buy the Select SL14-HD hinge from us today.

Remember, custom lengths, finishes and electric preps are available on the Select SL14HD hinge. Please call us if you require any of these on your Select full mortise hinges.

Features of the Select SL14-HD

MATERIAL:

Extruded 6063 T6 aluminum alloy with self-lubricating polyester thrust bearings.

LENGTHS:

The Select SL14HD is available in 83", 85", 95" and 120" lengths standard for nominal door heights. Custom lengths are available.

LOAD/FREQUENCY RATINGS:

For 1-3/4" doors. 48" max. door width in 16 gauge hollow metal (min.) or 1/8" aluminum (min.).

Standard Duty — Tested per BHMA standards for medium-frequency doors up to 200 lb. without frame or door reinforcement. Click here to view SL14 SD.

Heavy Duty — Tested per BHMA standards. Up to 200 lb. doors (high-frequency) and up to 400 lb. doors (medium-frequency) without frame or door reinforcement; up to 600 lb. doors (low-frequency) with the use of Rivnuts in the frame and door. 

FINISHES:

All Select SL14HD hinges are stocked in Clear and Dark Bronze anodized aluminum. Custom anodized or painted finishes are available. Product painted or anodized in the field voids the SELECT hinge warranty.

CLOSERS:

Conventional overhead surface, concealed sliding arm overhead or floor closers may be used with SELECT hinges. Pivot-type floor closers (with a fixed, conflicting center pivot) must be replaced.

ORDER:

Specify length, finish and standard duty (SD) or heavy duty (HD). Also, specify door and frame screw applications. 12-24 x 3/4" self-drilling, thread-forming 410SS Phillips undercut flathead screws are provided as a standard pack unless otherwise specified. Wood and thread-forming screws also available. Security screws optional at extra cost.

AVAILABLE ELECTRIC PREPS:

EPT, ATW, EMS, CTW4, CTW5, CTW8, CTW10, CTW12, CMG, AP and RP. For CTW12 prep, please consult us for engineering approval. Call us if you want electric prep on your Select SL14-HD hinge.

BHMA CERTIFICATION:

Select SL14-SD and Select SL14-HD geared continuous hinges conform to BHMA Standard ANSI/BHMA A156.26-2006 Grade 1.

 Select SL14HD Screw Count

Select Hinges Product Selection Table

SELECT GEARED HINGES
Full Surface (Click Image Below to Go to Category)	Half Surface (Click Image Below to Go to Category)	Full Mortise/Concealed (Click Image Below to Go to Category)	Half Mortise (Click Image Below to Go to Category)	Swing Clear (Click Image Below to Go to Category)	Wide Throw (Click Image Below to Go to Category)	Toilet Partition (Click Image Below to Go to Category)
SL21SD,SL21HD	SL53HD	SL11SD, SL11HD, SL11LL	SL52HD	SL41HD, SL41LL	SL40HD	SL60/SL62
SL57SD,SL57HD	SL54HD	SL12HD
	SL77HD	SL14SD,SL14HD
		SL18SD,SL18HD,SL18LL
		SL24SD,SL24HD,SL24LL
		SL26LL
		SL27LL
		SL31HD
		SL38SD
		SL44HD
		SL48HD
		SL71HD
		SL84HD, SL84LL

SELECT PIN & BARREL HINGES
Full Surface (Click Image Below to Go to Category)	Half Surface (Click Image Below to Go to Category)	Full Mortise/Concealed (Click Image Below to Go to Category)	Half Mortise (Click Image Below to Go to Category)	Swing Clear (Click Image Below to Go to Category)	Toilet Partition (Click Image Below to Go to Category)
SL302	SL303	SL200	SL306	SL310	SL402TP
SL309		SL300		SL311	SL902TP
		SL305
		SL315
		SL3500