Select SL14 SD Standard Duty Concealed Geared Continous Hinges

 

Select SL14 SD Standard Duty Concealed Geared Continous Hinges

The Select SL14 SD Concealed Geared Continous Hinge with Narrow Frame Leaf for weatherstripping or smoke seal is a high quality hinge certified by the US Department of State, with its 60 minute certification. The SL14 SD hinge is available in various lengths of 83", 85", 95" and 120". Custom lengths for the Select SL14SD are also available. Call us today, if you are looking for a Select SL14-SD with a custom length.

The Select SL14SD hinge is available in two finishes - clear anodized aluminium and dark bronze anodized aluminium. Apart from the standard duty hinge for medium frequency doors, the SL14 HD heavy duty select commercial door hinge is also available here.

Select commercial door hinge such as the Select SL14 SD are renowned for their performance and quality. These hinges are able to handle high traffic with ease. The high quality finishes on Select commercial door hinge inhibits corrosion. As a result, installing a Select commercial door hinge leads to lesser maintenance costs and time spent in troubleshooting.

We sell Select SL14-SD at extremely attractive prices. Call us for any questions that you might have.

Features of the Select SL14SD

MATERIAL:

Extruded 6063 T6 aluminum alloy with selflubricating polyester thrust bearings. LENGTHS: 83", 85", 95" and 120" lengths standard for nominal door heights. Custom lengths are available.

LOAD/FREQUENCY RATINGS:

For 1-3/4" doors. 48" max. door width in 16 gauge hollow metal (min.) or 1/8" aluminum (min.).

Standard Duty — Tested per BHMA standards for medium-frequency doors up to 200 lb. without frame or door reinforcement.

Heavy Duty — Tested per BHMA standards. Up to 200 lb. doors (high-frequency) and up to 400 lb. doors (medium-frequency) without frame or door reinforcement; up to 600 lb. doors (low-frequency) with the use of Rivnuts in the frame and door. Click here to view SL14 HD.

FINISHES:

All SL14 hinges are stocked in Clear and Dark Bronze anodized aluminum. Custom anodized or painted finishes are available. Product painted or anodized in the field voids the SELECT hinge warranty.

CLOSERS:

Conventional overhead surface, concealed sliding arm overhead or floor closers may be used with SELECT hinges. Pivot-type floor closers (with a fixed, conflicting center pivot) must be replaced.

ORDER:

Specify length, finish and standard duty (SD) or heavy duty (HD). Also, specify door and frame screw applications. 12-24 x 3/4" self-drilling, thread-forming 410SS Phillips undercut flathead screws are provided as a standard pack unless otherwise specified. Wood and thread-forming screws also available. Security screws optional at extra cost.

AVAILABLE ELECTRIC PREPS:

EPT, ATW, EMS, CTW4, CTW5, CTW8, CTW10, CTW12, CMG, AP and RP. For CTW12 prep, please consult factory for engineering approval.

BHMA CERTIFICATION:

SL14SD and SL14HD geared continuous hinges conform to BHMA Standard ANSI/BHMA A156.26-2006 Grade 1.

 Screw Count for the Select SL14-SD

Select Hinges Product Selection Table

SELECT GEARED HINGES
Full Surface (Click Image Below to Go to Category)	Half Surface (Click Image Below to Go to Category)	Full Mortise/Concealed (Click Image Below to Go to Category)	Half Mortise (Click Image Below to Go to Category)	Swing Clear (Click Image Below to Go to Category)	Wide Throw (Click Image Below to Go to Category)	Toilet Partition (Click Image Below to Go to Category)
SL21SD,SL21HD	SL53HD	SL11SD, SL11HD, SL11LL	SL52HD	SL41HD, SL41LL	SL40HD	SL60/SL62
SL57SD,SL57HD	SL54HD	SL12HD
	SL77HD	SL14SD,SL14HD
		SL18SD,SL18HD,SL18LL
		SL24SD,SL24HD,SL24LL
		SL26LL
		SL27LL
		SL31HD
		SL38SD
		SL44HD
		SL48HD
		SL71HD
		SL84HD, SL84LL

SELECT PIN & BARREL HINGES
Full Surface (Click Image Below to Go to Category)	Half Surface (Click Image Below to Go to Category)	Full Mortise/Concealed (Click Image Below to Go to Category)	Half Mortise (Click Image Below to Go to Category)	Swing Clear (Click Image Below to Go to Category)	Toilet Partition (Click Image Below to Go to Category)
SL302	SL303	SL200	SL306	SL310	SL402TP
SL309		SL300		SL311	SL902TP
		SL305
		SL315
		SL3500