Select SL18 LL Heavy Duty Concealed Geared Continous Hinges

 

Select SL18 LL Heavy Duty Concealed Geared Continous Hinges

The Select SL18 LL Concealed Geared Continous Hinge Beveled Frame Leaf for weatherstripping or smoke seal is a high quality hinge certified by the US Department of State, with its 60 minute certification. The Select SL18 LL is a great subsitute for the Roton 780-111LL hinge. The Select SL18 LL hinge is designed for use on heavy doors, up to 1000 lbs, with 1/8" door inset and 1-3/4'' door thickness.

The Select SL18LL is available in custom lengths, custom finishes and various electric preps. Electric preparations such as Accessible Through-Wire (ATW), Electric Power Transfer Cutout (EPT), Concealed Through-Wire (CTW), Exposed Electric Monitor Switch (EMS), Concealed Adjustable Monitor Switch (CMG), Access Panel (AP) and Removable Panel (RP) are available for the Select SL18LL hinge. Call us, if you want any of these options on your Select SL18LL hinge.

High perfomance, less maintenance, quiet operation and security are some of the hallmarks of the Select SL18-LL hinge. Use the Select SL18-LL in both new or retrofit applications.

We at locksandsafes.com sell Select SL18-LL hinges at extremely attractive prices. This hinge is a great alternative to the Roton 780-111LL hinge.

Features of the Select SL18LL

MATERIAL:

Extruded 6063 T6 aluminum alloy with self-lubricating polyester thrust bearings.

LENGTHS:

83", 85", 95" and 120" lengths standard for nominal door heights. Custom lengths are available for the Select SL18 LL.

LOAD/FREQUENCY RATINGS:

For 1-3/4" doors. 48" max. door width in 16 gauge hollow metal (min.) or 1/8" aluminum (min.).

Standard Duty — Tested per BHMA standards for medium-frequency doors up to 200 lb. without frame or door reinforcement. Click here to view SL18 SD.

Heavy Duty — Tested per BHMA standards. Up to 200 lb. doors (high-frequency) and up to 400 lb. doors (medium-frequency) without frame or door reinforcement; up to 600 lb. doors (low-frequency) with the use of Rivnuts in the frame and door. Click here to view SL18 HD.

Heavy Duty (LL) — Our HD hinge with additional fastener holes for low-frequency doors up to 1,000 lb., including most lead-lined doors. Rivnuts are recommended in the frame and door on extremely tall, extremely heavy or wide doors. 

FINISHES:

All Select SL18-LL hinges are stocked in Clear and Dark Bronze anodized aluminum. Custom anodized or painted finishes are available. Product painted or anodized in the field voids the SELECT hinge warranty.

CLOSERS:

Conventional overhead surface, concealed sliding arm overhead or floor closers may be used with SELECT SL18LL hinges. Pivot-type floor closers (with a fixed, conflicting center pivot) must be replaced.

ORDER:

Specify length, finish and standard duty (SD), heavy duty (HD) or heavy duty with additional fastener holes (LL). Also, specify door and frame screw applications. 12-24 x 3/4" self-drilling, thread-forming 410SS Phillips undercut flathead screws are provided as a standard pack unless otherwise specified. Wood and thread-forming screws also available. Security screws optional at extra cost.

AVAILABLE ELECTRIC PREPS:

EPT, ATW, EMS, CTW4, CTW5, CTW8, CTW10, CTW12, CMG, AP and RP. For CTW12 prep, please consult us for engineering approval.

BHMA CERTIFICATION:

Select SL18SD, Select SL18HD and Select SL18LL geared continuous hinges conform to BHMA Standard ANSI/BHMA A156.26-2006 Grade 1.

Select SL18-LL Screw Count

Part Number Interchange

Select Hinges Product Selection Table

SELECT GEARED HINGES
Full Surface (Click Image Below to Go to Category)	Half Surface (Click Image Below to Go to Category)	Full Mortise/Concealed (Click Image Below to Go to Category)	Half Mortise (Click Image Below to Go to Category)	Swing Clear (Click Image Below to Go to Category)	Wide Throw (Click Image Below to Go to Category)	Toilet Partition (Click Image Below to Go to Category)
SL21SD,SL21HD	SL53HD	SL11SD, SL11HD, SL11LL	SL52HD	SL41HD, SL41LL	SL40HD	SL60/SL62
SL57SD,SL57HD	SL54HD	SL12HD
	SL77HD	SL14SD,SL14HD
		SL18SD,SL18HD,SL18LL
		SL24SD,SL24HD,SL24LL
		SL26LL
		SL27LL
		SL31HD
		SL38SD
		SL44HD
		SL48HD
		SL71HD
		SL84HD, SL84LL

SELECT PIN & BARREL HINGES
Full Surface (Click Image Below to Go to Category)	Half Surface (Click Image Below to Go to Category)	Full Mortise/Concealed (Click Image Below to Go to Category)	Half Mortise (Click Image Below to Go to Category)	Swing Clear (Click Image Below to Go to Category)	Toilet Partition (Click Image Below to Go to Category)
SL302	SL303	SL200	SL306	SL310	SL402TP
SL309		SL300		SL311	SL902TP
		SL305
		SL315
		SL3500