Select SL52 HD Heavy Duty Half Mortise Geared Continous Hinges

 

Select SL52 HD Heavy Duty Half Mortise Geared Continous Hinges | Select SL52HD Half Mortise Piano Hinge

The Select SL52 HD half mortise geared continous hinge mounts on frame face and door edge. The Select SL52 HD is available in two colors - Clear Anodized Aluminium and Dark Bronze Anodized Aluminium. Anodizing the Select SL52HD inhibits corrosion, and delivers durability and life to the hinge. The Select SL52HD is available in lengths of 83'', 85'', 95'' and 120''. Custom lengths are also available upon request. Please call us if you want your Select SL52HD in a custom length.

Other features of the Select 52-HD include lifetime lubrication and superior performance. As a result, lesser maintenance is required for these hinges. This leads to savings in time and money, which would otherwise have been spent on maintaince of the Select SL52-HD hinges. 

Locksandsafes.com sells Select Hinges including the Select SL52-HD hinges at extremely attractive prices.  

Features of the Select 52HD

MATERIAL:

Extruded 6063 T6 aluminum alloy with self-lubricating polyester thrust bearings.

LENGTHS:

The Select SL52HD is available in 83"and 95" lengths standard for nominal door heights. Custom lengths are available.

LOAD/FREQUENCY RATINGS:

For 1-3/4" doors. 48" max. door width in 16 gauge hollow metal (min.) or 1/8" aluminum (min.).

Heavy Duty — Tested per BHMA standards. Up to 200 lb. doors (high-frequency) and up to 400 lb. doors (medium-frequency) without frame or door reinforcement; up to 600 lb. doors (low-frequency) with the use of Rivnuts in the frame and door.

FINISHES:

All Select SL52-HD hinges are stocked in Clear and Dark Bronze anodized aluminum. Custom anodized or painted finishes are available. Product painted or anodized in the field voids the SELECT hinge warranty.

CLOSERS:

Conventional overhead surface, concealed sliding arm overhead or floor closers may be used with SELECT hinges. Pivot-type floor closers (with a fixed, conflicting center pivot) must be replaced.

ORDER:

Specify length, finish and heavy duty (HD). Also, specify door and frame screw applications. 12- 24 x 3/4" self-drilling, thread-forming 410SS Phillips undercut flathead screws are provided as a standard pack unless otherwise specified. Wood and thread-forming screws also available. Security screws optional at extra cost.

AVAILABLE ELECTRIC PREPS:

EPT.

BHMA CERTIFICATION:

Select SL52HD geared continuous hinges conform to BHMA Standard ANSI/BHMA A156.26-2006 Grade 1.

Select SL52-HD Screw Count

Part Number Interchange | Select SL52HD Half Mortise Geared Continous Hinges

Select Hinges Product Selection Table

SELECT GEARED HINGES
Full Surface (Click Image Below to Go to Category)	Half Surface (Click Image Below to Go to Category)	Full Mortise/Concealed (Click Image Below to Go to Category)	Half Mortise (Click Image Below to Go to Category)	Swing Clear (Click Image Below to Go to Category)	Wide Throw (Click Image Below to Go to Category)	Toilet Partition (Click Image Below to Go to Category)
SL21SD,SL21HD	SL53HD	SL11SD, SL11HD, SL11LL	SL52HD	SL41HD, SL41LL	SL40HD	SL60/SL62
SL57SD,SL57HD	SL54HD	SL12HD
	SL77HD	SL14SD,SL14HD
		SL18SD,SL18HD,SL18LL
		SL24SD,SL24HD,SL24LL
		SL26LL
		SL27LL
		SL31HD
		SL38SD
		SL44HD
		SL48HD
		SL71HD
		SL84HD, SL84LL

SELECT PIN & BARREL HINGES
Full Surface (Click Image Below to Go to Category)	Half Surface (Click Image Below to Go to Category)	Full Mortise/Concealed (Click Image Below to Go to Category)	Half Mortise (Click Image Below to Go to Category)	Swing Clear (Click Image Below to Go to Category)	Toilet Partition (Click Image Below to Go to Category)
SL302	SL303	SL200	SL306	SL310	SL402TP
SL309		SL300		SL311	SL902TP
		SL305
		SL315
		SL3500