Select SL53 HD Heavy Duty Half Surface Geared Continous Hinges

 

Select SL53 HD Heavy Duty Half Surface Geared Continous Hinges

The Select SL53 HD heavy duty half surface geared continous hinges is the perfect solution for renovation/retrofit or new construction. The Select SL53 HD mounts on door face and frame rabbet. The Select SL53 HD hinge comes with a tamper-resistant, removable door leaf cover. The standard barrel nuts accommodate 1-3/8" to 1-3/4" doors, while the long barrel nuts for 2" to 2-1/4" doors  are available upon request.

The Select SL53-HD is a high quality, high safety grade 1 hinge, which conforms to strict quality standards. The Select SL53-HD has a US Department of State certification and is approved for use in embassies overseas.

The Select SL53HD hinge is designed to handle high traffic. With the Select SL53HD, rest assured, that you will save operational costs.

The Select SL53-HD hinge is available in standard lengths of 83'', 85'', 95'' and 120'' - and is also available in custom lengths. Please call us if you want the Select SL53 HD half surface geared continous hinges in a custom length.

The Select SL53HD is available in clear anodized aluminium and dark bronze anodized alumnium. Custom finishes - both painted and anodized are also available. Please call us if you want the Select SL53 HD half surface geared continous hinges in a custom finish.

Features of the Select SL53HD

MATERIAL:

Extruded 6063 T6 aluminum alloy with self-lubricating polyester thrust bearings.

LENGTHS:

The Select SL53HD is available in 83", 85", 95" and 120" lengths standard for nominal door heights. Custom lengths are available.

LOAD/FREQUENCY RATINGS:

For 1-3/8" – 1-3/4" doors standard; long barrel nuts available for 2" – 2-1/4" doors. 48" max. door width in 16 gauge hollow metal (min.) or 1/8" aluminum (min.).

Heavy Duty – Tested per BHMA standards. Up to 200 lb. doors (high-frequency) and up to 400 lb. doors (medium-frequency) without frame or door reinforcement; up to 600 lb. doors (low-frequency) with the use of Rivnuts in the frame.

FINISHES:

All SL53-HD hinges are stocked in Clear and Dark Bronze anodized aluminum. Custom anodized or painted finishes are available. Product painted or anodized in the field voids the SELECT hinge warranty.

CLOSERS:

Conventional overhead surface, concealed sliding arm overhead or floor closers may be used with SELECT hinges. Pivot-type floor closers (with a fixed, conflicting center pivot) must be replaced.

ORDER:

Specify length, finish and heavy duty (HD). Also, specify door and frame screw applications. 12-24 x 3/4" self-drilling, thread-forming 410SS Phillips undercut flathead screws, 1/4-20 through-bolts and 1/4-20 shoulder screws (for doors up to 1-3/4" thick) are provided as a standard pack unless otherwise specified. Wood and thread-forming screws also available. Security screws optional at extra cost.

AVAILABLE ELECTRIC PREPS:

EPT.

BHMA CERTIFICATION:

Select SL53 HD geared continuous hinges conform to BHMA Standard ANSI/BHMA A156.26-2006 Grade 1.

Select SL53-HD Screw Count

Part Number Interchange | Select SL53 HD Half Surface Geared Continous Hinges

Select Hinges Product Selection Table

SELECT GEARED HINGES
Full Surface (Click Image Below to Go to Category)	Half Surface (Click Image Below to Go to Category)	Full Mortise/Concealed (Click Image Below to Go to Category)	Half Mortise (Click Image Below to Go to Category)	Swing Clear (Click Image Below to Go to Category)	Wide Throw (Click Image Below to Go to Category)	Toilet Partition (Click Image Below to Go to Category)
SL21SD,SL21HD	SL53HD	SL11SD, SL11HD, SL11LL	SL52HD	SL41HD, SL41LL	SL40HD	SL60/SL62
SL57SD,SL57HD	SL54HD	SL12HD
	SL77HD	SL14SD,SL14HD
		SL18SD,SL18HD,SL18LL
		SL24SD,SL24HD,SL24LL
		SL26LL
		SL27LL
		SL31HD
		SL38SD
		SL44HD
		SL48HD
		SL71HD
		SL84HD, SL84LL

SELECT PIN & BARREL HINGES
Full Surface (Click Image Below to Go to Category)	Half Surface (Click Image Below to Go to Category)	Full Mortise/Concealed (Click Image Below to Go to Category)	Half Mortise (Click Image Below to Go to Category)	Swing Clear (Click Image Below to Go to Category)	Toilet Partition (Click Image Below to Go to Category)
SL302	SL303	SL200	SL306	SL310	SL402TP
SL309		SL300		SL311	SL902TP
		SL305
		SL315
		SL3500