Select SL41 HD Heavy Duty Swing Clear Geared Continous Hinges

 

Select SL41 HD Heavy Duty Swing Clear Geared Continous Hinges

The Select SL41 HD heavy duty swing clear geared continous hinges is a grade 1 hinge, designed for 1-3/4'' thick doors. The Select SL41 HD requires 2-1/4" frame face for full rotation clearance. This Select SL41-HD is a good substitute for the Roton 780-041HD hinge.

The Select SL41HD hinge conforms to Select's stringent quality and safety standards. These Select SL41 HD swing clear geared continous hinges has been certified by the US Department of State. The high quality of anodized finishing prevents corrosion. When the door is fully closed there are no accessible screws, bolts or pins. The Select SL41 HD swing clear geared continuous hinges eliminates the gap between the door and frame, providing a weatherproof, rust-proof, tamper-proof barrier.

The Select SL41-HD also conforms to high performance levels. It does not fail easily, saving money that would otherwise have been spent in replacing the hinge. Lifetime lubrication on the Select SL41-HD eliminates the need for periodic maintenance.

Cross Reference for the Select SL41HD hinges - Roton 780-041HD and ABH A410HD.

We sell Select SL41HD at extremely reasonable prices. Call us today for any questions or doubts that you might have regarding the Select SL41HD hinge or any other Select Hinge. We are a phone call away.

Features of the Select SL41HD

MATERIAL:

Extruded 6063 T6 aluminum alloy with self-lubricating polyester thrust bearings.

LENGTHS:

Select SL41-HD is available in 83", 85", 95" and 120" lengths standard for nominal door heights. Custom lengths are available.

LOAD/FREQUENCY RATINGS:

For 1-3/4" doors. 48" max. door width in 16 gauge hollow metal (min.) or 1/8" aluminum (min.).

Heavy Duty — Tested per BHMA standards. Up to 200 lb. doors (high-frequency) and up to 400 lb. doors (medium-frequency) without frame or door reinforcement; up to 600 lb. doors (low-frequency) with the use of Rivnuts in the frame and door.

Heavy Duty (LL) — Our HD hinge with additional fastener holes for low-frequency doors up to 1,000 lb., including most lead-lined doors. Rivnuts are recommended in the frame and door on extremely tall, extremely heavy or wide doors.

FINISHES:

All Select SL41HD hinges are stocked in Clear and Dark Bronze anodized aluminum. Custom anodized or painted finishes are available. Product painted or anodized in the field voids the SELECT hinge warranty.

CLOSERS:

Conventional overhead surface, concealed sliding arm overhead or floor closers may be used with SELECT hinges. Pivot-type floor closers (with a fixed, conflicting center pivot) must be replaced.

ORDER:

Specify length, finish and heavy duty (HD) or heavy duty with additional fastener holes (LL). Also, specify door and frame screw applications. 12-24 x 3/4" self-drilling, thread-forming 410SS Phillips undercut flathead screws are provided as a standard pack unless otherwise specified. Wood and thread-forming screws also available. Security screws optional at extra cost.

AVAILABLE ELECTRIC PREPS:

EPT, EMS and CMG. For EPT prep on this hinge model, please consult us for engineering approval.

BHMA CERTIFICATION:

Select SL41 HD and Select SL41 LL geared continuous hinges conform to BHMA Standard ANSI/BHMA A156.26-2006 Grade 1.

Select SL41-HD Screw Count

Part Number Interchange | Select SL41 HD Swing Clear Geared Continous Hinges

Select Hinges Product Selection Table

SELECT GEARED HINGES
Full Surface (Click Image Below to Go to Category)	Half Surface (Click Image Below to Go to Category)	Full Mortise/Concealed (Click Image Below to Go to Category)	Half Mortise (Click Image Below to Go to Category)	Swing Clear (Click Image Below to Go to Category)	Wide Throw (Click Image Below to Go to Category)	Toilet Partition (Click Image Below to Go to Category)
SL21SD,SL21HD	SL53HD	SL11SD, SL11HD, SL11LL	SL52HD	SL41HD, SL41LL	SL40HD	SL60/SL62
SL57SD,SL57HD	SL54HD	SL12HD
	SL77HD	SL14SD,SL14HD
		SL18SD,SL18HD,SL18LL
		SL24SD,SL24HD,SL24LL
		SL26LL
		SL27LL
		SL31HD
		SL38SD
		SL44HD
		SL48HD
		SL71HD
		SL84HD, SL84LL

SELECT PIN & BARREL HINGES
Full Surface (Click Image Below to Go to Category)	Half Surface (Click Image Below to Go to Category)	Full Mortise/Concealed (Click Image Below to Go to Category)	Half Mortise (Click Image Below to Go to Category)	Swing Clear (Click Image Below to Go to Category)	Toilet Partition (Click Image Below to Go to Category)
SL302	SL303	SL200	SL306	SL310	SL402TP
SL309		SL300		SL311	SL902TP
		SL305
		SL315
		SL3500