Command Access PD18-M Grade 1 Motorized Storefront Exit Device | Adams Rite 8800/8600 Retrofit

Command Access PD18-M Motorized Storefront Exit Device | Adams Rite 8800/8600 Retrofit

The Command Access PD18-M series is a motorized latch pullback Grade 1 architectural exit device; made for use in all institutions and commercial buildings storefront applications. All PD18-M models are equipped with our PTS “push to set” technology. We know that door conditions change and in retrofit scenarios you never know exactly what you’re walking into. But with our PTS adjustment your post installation adjustment is greatly simplified in 5 quick seconds. As a retrofit for the Adams Rite 88 or 86 models are designed to utilize the existing mounting locations and mortise or rod & case assemblies without having to remove the door Install this device with the confidence of knowing that the PD18-M series meets or exceeds the high standards of other grade 1 products and carries our 3-year “no hassle “ warranty, meaning we will support you.

• Retrofits the Adams Rite 8800 & 8600 series exit devices
• Easy Install - Utilize existing hardware with no additional prep required
• Motor latch pullback electrfication w/ Push to Set - Easy electronic adjustment
• Long wire runs w/ 18ga - No need for speciality power suplly right above the door.
• 3 Year no hassle warranty

FEATURES:

• Motorized latch retraction is fast, quiet, and smooth!

• MM4 Smart Module: On board diagnostics with audible feedback for adjustment and power issues

• “PTS”: 5 second electronic adjustment for easy post installation adjustment

• Electric dogging rated for continuous duty - Auto re-engage if pulled from the dogged position

• Low current draw: Compatible with most 24VDC, 1A (or greater) regulated & linear power supplies

• Up to 300’ with 2-18ga --Long wire runs with provides installer with convenience of placing the locking device power supply in a centralized location; i.e. the same closet as the access panel

• 8’ cable with Quick Connect for MM4 module to easily connect to power supply lead

• The slim, compact attractive low profile design enables mounting on narrow-style doors.

• Retrofits Adams Rite 8800/8600 series

• Maintains factory dogging

• 3-year “no hassle” warranty - Longer than the traditional 1 year warranty because our stuff works!

SPECIFICATIONS

• Voltage range – 24 to 28 VDC

• System protec on – unit shutdown when voltage exceeds 28VDC

• Standard - Average Current Peak: 900MA, Average Current Hold: 190mA

• High Torque - Average Current Peak: 1.4A, Average Current Hold: 250mA

• PTS adjustment – approx. 1/4”Electronic travel adjustment – approx. 1/4”

• 300’ with 18ga wire • 500’ with 16ga wire

HARDWARE:

Handing

• Device is non-handed.

Pushbar Length

• Standard sizes: dimensioned for 36” and 48” openings.

48” - Cutdown 0”

36”- Cutdown 0”

Door Thickness

• Suits 1-3/4” standard

Projection

• 2-5/8” when fully projected, 1-5/8”when dogged.

Stile Width

• Minimum 2” Stile. Fits narrow, medium, and wide stile aluminum doors.

Dogging

• Standard dogging with hex key or cylinder dogging option. Electric dogging also available.

Fasteners

• Standard self-tapping screws

Verticle Rods

• Top and bottom steel rods for easy adjustment

• Standard device is adjustable for nominal door heights.