Dorma Kaba 8300 Grade 1 Rim Exit Device

Dorma Kaba 8300 Grade 1 Rim Exit Device

Certifications

• Certified/listed to ANSI/BHMA 156.3, Grade 1 for exit devices.

• U.L. and C.U.L. listed under their continuing reinspection programs and conforms to standards U.L. 10C positive pressure testing.

• Complies with NFPA 101 life safety code. Fire rated devices comply with NFPA 80 fire doors and windows.

• Devices, trim, pulls, and levers comply with the Americans for Disabilities Act, 1994, and ICC A117.1 for accessible and usable buildings and facilities.

• Contributes to U.S. Green Building Council, LEED MR Credits 2.1, 4.1, 4.2, and 5.1.

• Listed with the California Department of Forestry and Fire Protection, Office of the State Fire Marshal.

• Hurricane code approved to Miami-Dade County Florida acceptance No. 06-912.04

Specifications

• All exit devices shall be 8000 Series rim, surface vertical rod or surface vertical rod “less bottom rod” devices.

• All device touchbars, rails, and integral parts shall be constructed of solid steel with ABS thermoplastic end caps and covers.

• Non-labeled units to have hex-key dogging standard.

• Fire rated versions shall be available for labeled applications.

• All surface vertical rod devices shall have pullman type latch bolts for the top latch with a round slide bolt bottom latch.

• All units shall offer trim options ranging from no trim, exit only blank trim, entrance by trim when touchbar is dogged, entrance when latch bolt is retracted by key, and entrance by lever set with a key to lock and unlock lever.

• Device touchbar, rail, and rods shall be available with a powder coated finish or base material stainless steel.