Falcon F-25-C-EO | Grade 1 Fire Rated Concealed Vertical Rod Exit Device

Falcon F-25-C-EO | Grade 1 Fire Rated Concealed Vertical Rod Exit Device

The Falcon F-25-C-EO is a Grade 1 fire rated concealed vertical rod exit device. The Falcon F25-C fire concealed vertical rod exit device combines the safety of a fire rated device with the aesthetics of a concealed vertical rod device. One of the features of the F25C fire rated concealed vertical rod exit device is that in-field adjustments are simple to do. This is due to a patented center slide mechanism. Further the Falcon F-25C fire cvr exit device has a two-point latching mechanism which ensures higher security.

The Falcon F-25-C fire rated concealed vertical rod exit device is available at best prices from locksandsafes.com. The Falcon F-25-C fire cvr can be installed on both single and double doors, making them suitable for a wide range of commercial and institutional settings such as office buildings, schools, hospitals, and retail establishments. The device is an exit ony device but numerous exit trims are available for purchase seperately.

Specifications of Falcon F-25-C Fire Rated Concealed Vertical Rod Exit Device

Hand

Field reversible

UL

“A” label (3 hr.); 4'0" x 10'0" single doors; 8'0" x 10'0" pair of doors (F-25-M x F-25-V or F-25-C).

Finishes

US3 (605); US4 (606); US10 (612); US11 (643e); US15 (619); US19 (622); US26 (625); US26D (626); US32 (629); US32D (630); US28 (628), 313AN (710).

See our guide on door hardware finishes here.

Strikes

4188 mortised top, 2130 bottom standard

Latchbolt

Stainless steel, 3⁄4" throw.

Deadlocking latchbolt

Standard

Stock sizes

See chart

Doors

1 3⁄4" thick, wood or metal. Specify thickness if other than 1 3⁄4".

Projection

2 3⁄4" maximum

Stile

4" minimum

Mounting height

40 1 ⁄4" from CL to finished floor

Electric functions

Can be interfaced with building security systems. Motorized electric latch retraction (fail secure only), FSA/FSE trim, security monitoring, delayed egress and exit alarm available.

Fasteners

All mounting screws are concealed. All machine screws (AMS) standard.

Sex bolts

Required when used with wood, composite or non-reinforced hollow metal doors. For EO device specify 6 - 425 (#10-24) SNB. For devices with trim, specify 2 - 425 (#10-24) SNB.

ANSI

Certified ANSI A156.3-2001 grade 1 standards.

25-C-LBR

Less bottom rod, auxiliary fire pin required per pair

Vertical rods

Furnished to length based on 40 1 ⁄4" horizontal CL to finished floor and a 7'0" door. Variations from these standards must be specified when ordering.

Shim kits

Consult factory

Door Application

1. Device: 25-C

Door size: 3'

Door strike: All

Min stile (in): l 4" (6 1 ⁄2" for wood doors)

Min door opening width: 2' 7 1 ⁄8"

2. Device: 25-C

Door size: 4'

Door strike: All

Min stile (in): l 4" (6 1 ⁄2" for wood doors)

Min door opening width: 3' 1 1 ⁄8"