First Choice PSMEL-1500 | 12/24V – 1 AMP Power Supply For 1 Exit Device

First Choice PSMEL-1500 | 12/24V – 1 AMP Power Supply For 1 Exit Device

Specifications

• PSMEL1500 shall operate up to one (1) 24VDC panic hardware device.

• In addition, an auxiliary power output shall provide power for accessory devices such as card readers, key-pads, REX PIRs, electronic timers, relays, etc.

VISUAL INDICATORS

• Green AC Power LED indicates 115/AC present

• Red LED indicates presence of 24VDC

CODE/AGENCY LISTINGS

• UL File for Access Control Systems Units (UL 294)

• CUL Listed – CSA Standard C22.2 No. 205-M1983, Signal Equipments

• CSFM – California State Fire Marshal Approved

BATTERY BACKUP

• Built-in charger for sealed lead acid or gel type batteries

• Automatic switch over to stand-by battery when AC fails

• Maximum charge current .4 amps

• When 4AA batteries are used, capacity for emergency stand-by is at least 30 minutes

INPUT

• Input 115VAC 60Hz, 2.5 amp or 230VAC, 50Hz, 15 amps

• One (1) N.O. Trigger Inputs

OUTPUTS

• 12 VDC or 24VDC selectable outputs

• 1 amp supply current

• One (1) Fail-Safe (lock +) supplies power when unit is not being triggered

• One (1) Fail-Secure (strike +) supplies power when unit is being triggered

• (Com –) supplies negative power

Note: Wiring methods shall be in accordance with the National Electrical Code/NPFA 70/NFPA 72 ANSI, and with all local codes and authorities having jurisdiction. Product is intended for indoor use only.