Best (Formerly Precision) 2301 | 2300 Series Grade 1 Mortise Exit Device, Non Fire Rated
SPECIFICATIONS
Doors
For all types of single and double door applications. Available for 1-3/4” thick, up to 4-0” wide opening. Furnished standard for 1-3/4” thick, 3’-0” wide opening.
Device
Covers ANSI A115.2 (Type 161), A115.18 cylinder lock and A115.1 (Type 86) Mortise Lock preparation.
Double Cylinder
Handed, “10” Function available. Requires one rim type cylinder and one 1-1/4” long mortise type cylinder, not furnished standard.
Base Material
The Cover, Touchbar, Device Channel, Lock/Hinge Side Filler and End Cap are furnished of heavy wrought Brass, Bronze or Stainless Steel. US28 Devices are furnished with Aluminum, Brass, Bronze and Stainless Steel components.
Chassis
Investment Cast Steel, Zinc Dichromated.
Dogging
1/4" turn hex key dogging standard. NOT available on Fire Exit Hardware.
Touchbar Height
39-15/16" from floor standard.
Handed
Specify hand when ordering as RHRB or LHRB. Touchbar Assembly, Mortise Lock and Trim may be reversed in the field. For reversibility of complete device, mortise strike is required for the other hand.
ANSI/BHMA
Devices are BHMA certified for ANSI 156.3, Grade 1.
Case
Wrought Steel, Zinc Dichromate finish.
Lock Front Plate
8" x 1-1/4" Bronze, Brass or Stainless Steel, pivots for beveled or square edged doors.
Latchbolt
Stainless Steel, Deadlocking, 3/4" throw, anti-friction.
Guardbolt
Stainless Steel, sliding type.
Strikes
No. S982, handed curved lip strike furnished standard.
