Yale 6100ED A-ALR | Grade 1 Rim Exit Device, Non Fire Rated | Alarm with Red Screen Printed Pushpad | BSP Black Finish Only | 30-36 inch Door Opening Width

Yale 6100ED A-ALR | Grade 1 Rim Exit Device, Non Fire Rated | Alarm with Red Screen Printed Pushpad | BSP Black Finish Only | 30-36 inch Door Opening Width

6100ED FEATURES

• Designed for wide stile doors

• 3/4" throw deadlocking stainless steel pullman latchbolt

• Available in double cylinder function (must specify handing)

• Non-handed for easy installation

Applications

• Single swing doors

• Pairs of doors with removable mullions

• Wide stile aluminum, metal, wood or composite door materials

Specifications

Door Opening Width

-36 for 30" - 36" (76cm - 91cm) doors

Door Thickness

1-3/4" (44mm) standard. 

Minimum Stile Width

4-1/2" (114mm)

Projection

3-1/4" (83mm) active; 2-1/2" (63.5mm) dogged

Latchbolt

Stainless steel pullman style, 3/4" (19mm), deadlocking.

Strike

757F standard; 793 optional for pairs, panic only. Please contact us for optional strike.

Fasteners

Machine screws or wood door screws standard for panic.

ANSI/BHMA

Certified A156.3 Type 1, Grade 1

A-ALR FEATURES

Activation: Alarm is armed by turning key clockwise. Low audible chirp indicates alarm has been activated. Alarm will sound when the exit device pushpad is depressed. Factory preset for standard alarm mode which automatically resets after 5 minutes.

Continuous Alarm Mode: Alarm sounds continuous when the exit device pushpad is depressed. Alarm must be manually reset by keyswitch. (This feature is selected by a switch on the circuit board.)

Low Battery Warning: Audible chirp.

Nuisance Alarm: Factory preset for instant alarm. Selectable feature for alarm to sound when pushpad is depressed for more than 2 seconds. (This feature is selected by a switch on the circuit board.)

Arming Delay/Authorized Egress: 10-second delay (after arming) permitting egress (by turning key clockwise).

Power Requirements: One 9-Volt Battery (included).

Loudness: 90db @ 10 feet.

Arm/Disarm: Uses one 1-1/8" straight cam mortise cylinder. Clockwise turn arms the alarm, counter clockwise turn disarms or silences the alarm.

Device Status: A Red LED indicator will illuminate every 30 seconds when the alarm is armed.

Tamper Resistant: Builtin safety monitor sounds alarm when tampering occurs.

Warning: “A” supplied with “EMERGENCY EXIT - ALARM WILL SOUND” decal “A-ALR” supplied with red screenprinted pushpad (available in BSP black finish only)

Kit: Available in kit form for field retrofit. Please contact us.

Bar Length: A-ALR option only available in 36" length