Hager 4501 SVR FR | Hager 4500 Series Grade 1 Surface Vertical Rod Exit Device, Fire Rated
FEATURES
Covers
Stainless steel, zinc
Cover Tube
Aluminum
Dogging
• Hex key dogging standard on panic-rated devices
• Less dogging available on panic-rated devices, specify LD
• Cylinder dogging is available on panic-rated devices, specify CD (3902 mortise cylinder with standard cam sold separately. Cylinder Length of 1-1/8” (29mm) - 1-3/8” (35mm) is required.)
End Cap
Flush (Zinc)
Fasteners
• Wood and machine screws
• Thru-bolts supplied standard
Latchbolt
• Top - 1/2” (13 mm) throw, pullman type with automatic dead-latching, stainless steel
• Bottom - 1/2” (13 mm) throw, pullman type, held retracted during door swing, stainless steel
Strikes
• Stainless steel with stainless steel pin and roller - included standard with panic device
• Solid stainless steel - included standard with fire-rated device
• Surface applied to frame with slotted holes for easy adjustment
• 10’ (3048 mm) fire-rated device requires strike and hook kit, 4912 for top strike
• Double door strike for use with surface vertical rod and rim device available
SPECIFICATIONS
Door Thickness
1-3/4” (44 mm) - Standard up to 3”, except with night latch (NL) function which is 2-1/2”
Door Width
• 36’’ (914 mm) field sizeable to 30’’ (762 mm) panic-rated door and 28” (711 mm) fire-rated door
• 48’’ (1219 mm) field sizeable to 36’’ (914 mm) panic- or fire-rated door
Projection
• 3” (76 mm) in undogged position
• 2-5/8” (67 mm) in dogged position
Vertical Rods
• Rods for 7’ (2134 mm) doors - 33-1/4” (845 mm) top rod length
• Rods for 8’ (2438 mm) doors - 45-1/4” (1149 mm) top rod length
• Extension rods kits available, 2’ (610 mm) or 3’ (914 mm) for doors over 7’
Stile Width
• 5-3/8” (137 mm) - Minimum stile width required for single door and 5/8” (16 mm) stop
• 4-7/8” (124 mm) - Minimum stile width required for double doors
• 4-7/8” (124 mm) - Minimum stile width required for double door x Rim Device with double door strike
• All stile widths are measured from door edge
Notes
• Center line prep is 40”. If door prep elevation is lower, a longer top rod will need to be ordered.
• Recommended for use on appropriately reinforced doors
Hager 4500 Fire Rated Exit Device Certifications and Compliance
Hager 4500 Exit Device Profile
