Command Access MLRK1-CAL77 | Motorized Latch Retraction (MLR) Kit for Cal Royal 7700 Series Exit Device

FEATURES

• Next Generation MM4S Smart Module: On board diagnostics with audible feedback for adjustment and power issues

• “PTS”: 5 second electronic adjustment for easy post installation adjustment

• Electric dogging rated for continuous duty - Auto re-engage if push pad is pulled from dogged position

• Low Current Draw - Field switchable to “High Torque” mode

• Up to 300’ wire run with 2-18ga wire - Long wire runs provides installer with convenience of placing the Command locking hardware power supply in a centralized location; i.e. the same closet as the access control panel

• 8’ cable with Quick Connect for MM4S module to easily connect to power supply lead

• Optional Request-to-exit can be built-in

• 3-Year “No Hassle” Warranty

SPECIFICATIONS

Voltage:

• Voltage range – 22 to 28 VDC

• System protection – unit shutdown when voltage exceeds 28VDC

• Standard - Average Current Peak: 900 mA, Average Current Hold: 190mA

• High Torque - Average Current Peak: 2A, Average Current Hold: 250mA

• PTS adjustment – approx. 1/4”

Wire Run:

• 300’ with 18ga wire

Product Details:

• Weight: 2 Lbs

Device Cutdown Details:

36” - 3.75”

MLRK1-CAL77 Matrix

The MLRK1-CAL77 will work in new installations and as a replacement for installations with existing electrifications, matrix lists available options.

Command Access MLRK1 Series Latch Retraction Kits Product Reference Chart

Command Access MLRK1-CAL77 | Motorized Latch Retraction (MLR) Kit for Cal Royal 7700 Series Exit Device

The new MLRK1-CAL77 is a practical and cost-effective way to convert a mechanical Cal-Royal 77 or PD26 series device to an electrified latch pullback device. The retrofit kit will maintain all UL listings on the device and for peace of mind is backed by CAT’s 3-Year No Hassle Warranty. It easily secures onto the backactivating bracket and is secured with (2) screws, in a matter of seconds. The only hole you’ll need to drill is for the wire raceway. PTS allows for a smooth post-installation adjustment of the latch/latches. Last but not least, it features an updated MM4S module with 3 different energy consumption settings from energy conscious to high torque to get the tough jobs done! The only hole you’ll need to drill is the raceway! It utilizes our PTS “Push to Set” technology making post-installation adjustments incredibly easy.

FEATURES

• Next Generation MM4S Smart Module: On board diagnostics with audible feedback for adjustment and power issues

• “PTS”: 5 second electronic adjustment for easy post installation adjustment

• Electric dogging rated for continuous duty - Auto re-engage if push pad is pulled from dogged position

• Low Current Draw - Field switchable to “High Torque” mode

• Up to 300’ wire run with 2-18ga wire - Long wire runs provides installer with convenience of placing the Command locking hardware power supply in a centralized location; i.e. the same closet as the access control panel

• 8’ cable with Quick Connect for MM4S module to easily connect to power supply lead

• Optional Request-to-exit can be built-in

• 3-Year “No Hassle” Warranty

SPECIFICATIONS

Voltage:

• Voltage range – 22 to 28 VDC

• System protection – unit shutdown when voltage exceeds 28VDC

• Standard - Average Current Peak: 900 mA, Average Current Hold: 190mA

• High Torque - Average Current Peak: 2A, Average Current Hold: 250mA

• PTS adjustment – approx. 1/4”

Wire Run:

• 300’ with 18ga wire

Product Details:

• Weight: 2 Lbs

Device Cutdown Details:

36” - 3.75”

MLRK1-CAL77 Matrix

The MLRK1-CAL77 will work in new installations and as a replacement for installations with existing electrifications, matrix lists available options.

Command Access MLRK1 Series Latch Retraction Kits Product Reference Chart