Command Access MLRK1-DOR | Motorized Latch Retraction (MLR) Kit for Dorma 9000 Series Exit Device

FEATURES

• MM4S Smart Module: On board diagnostics with audible feedback for adjustment and power issues

• “PTS”: 5 second electronic adjustment for easy post installation adjustment

• Electric dogging rated for continuous duty - Auto re-engage if push pad is pulled from dogged position

• Low Current Draw - Field switchable to “High Torque” mode

• Up to 300’ wire run with 2-18ga wire - Long wire runs provides installer with convenience of placing the Command locking hardware power supply in a centralized location; i.e. the same closet as the access control panel

• 6” robust Molex Pigtail + 6’ Power lead to easily connect to power supply lead

• Request-to-exit kit available

• 3-year “no hassle” warranty

SPECIFICATIONS

Voltage:

• Voltage range – 24 +/- 10%

• System protection – unit shutdown when voltage exceeds 28VDC

• Standard - Average Current Peak: 900 mA, Average Current Hold: 215mA

• High Torque - Average Current Peak: 2A, High Average Current Hold: 250mA

• PTS adjustment – approx. 1/4”

Wire Run:

• 300’ with 18ga wire

Product Details:

• Weight: 2 Lbs

Device Cutdown Details:

36” & 48” at least 1” of filler plate

MLRK1-DOR Matrix

The MLRK1-DOR will work in new installations and as a replacement for installations with existing electrifications, matrix lists available options.

Command Access MLRK1 Series Latch Retraction Kits Product Reference Chart

Command Access MLRK1-DOR | Motorized Latch Retraction (MLR) Kit for Dorma 9000 Series Exit Device

The MLRK1-DOR is a practical and cost-effective way to convert a mechanical Dorma series device to an electrified latch pullback device, while maintaining the UL listing. Our easy-to-install motordriven kit installs in moments. It is equipped with PTS technology allowing for an easy postinstallation adjustment of the latch/latches. Last but not least, it features an updated motor module with 2 different energy consumption settings from energy conscious to high torque to get the tough jobs done!

FEATURES

• MM4S Smart Module: On board diagnostics with audible feedback for adjustment and power issues

• “PTS”: 5 second electronic adjustment for easy post installation adjustment

• Electric dogging rated for continuous duty - Auto re-engage if push pad is pulled from dogged position

• Low Current Draw - Field switchable to “High Torque” mode

• Up to 300’ wire run with 2-18ga wire - Long wire runs provides installer with convenience of placing the Command locking hardware power supply in a centralized location; i.e. the same closet as the access control panel

• 6” robust Molex Pigtail + 6’ Power lead to easily connect to power supply lead

• Request-to-exit kit available

• 3-year “no hassle” warranty

SPECIFICATIONS

Voltage:

• Voltage range – 24 +/- 10%

• System protection – unit shutdown when voltage exceeds 28VDC

• Standard - Average Current Peak: 900 mA, Average Current Hold: 215mA

• High Torque - Average Current Peak: 2A, High Average Current Hold: 250mA

• PTS adjustment – approx. 1/4”

Wire Run:

• 300’ with 18ga wire

Product Details:

• Weight: 2 Lbs

Device Cutdown Details:

36” & 48” at least 1” of filler plate

MLRK1-DOR Matrix

The MLRK1-DOR will work in new installations and as a replacement for installations with existing electrifications, matrix lists available options.

Command Access MLRK1 Series Latch Retraction Kits Product Reference Chart