Command Access MLRK1-LSDA2 | Motorized Latch Retraction (MLR) Kit for LSDA PD9200 Series Exit Device

FEATURES

• Next Generation MM4S Smart Module: On board diagnostics with audible feedback for adjustment and power issues

• “PTS”: 5 second electronic adjustment for easy post installation adjustment

• Electric dogging rated for continuous duty - Auto re-engage if push pad is pulled from dogged position

• Low Current Draw - Field switchable to “High Torque” mode

• Up to 300’ wire run with 2-18ga wire - Long wire runs provides installer with convenience of placing the Command locking hardware power supply in a centralized location; i.e. the same closet as the access control panel

• Push-n-Go Pigtail + 6’ cable with Quick Connect for MM4S module to easily connect to power supply lead

• Optional Request-to-exit can be built-in

• 3-year “no hassle” warranty

SPECIFICATIONS

Voltage:

• Voltage range – 24 to 28 VDC

• System protection – unit shutdown when voltage exceeds 28VDC

• Standard - Average Current Peak: 900A, Average Current Hold: 200mA

• High Torque - Average Current Peak: 2A, Average Current Hold: 250mA

• PTS adjustment – approx. 1/4”

Wire Run:

• 300’ with 18ga wire

Device Cutdown Details:

• 36” - 3”

• 48” - 5.5”

Command Access MLRK1-LSDA2 Matrix

Command Access MLRK1 Series Latch Retraction Kits Product Reference Chart

Command Access MLRK1-LSDA2 | Motorized Latch Retraction (MLR) Kit for LSDA PD9200 Series Exit Device

The new MLRK1-TS1 is a practical and cost-effective way to convert a mechanical LSDA PD9200 series device to an electrified latch pullback device. The retrofit kit will maintain all UL listings on the device and for peace of mind is backed by CAT’s 3-year no hassle warranty. The new unit easily hooks onto the back activating bracket and is secured with (2) screws, in a matter of seconds. The only hole you’ll need to drill is for the wire raceway. PTS allows for a smooth post-installation adjustment of the latch/latches. An optional built-in REX switch is available on all units! Last but not least, it features an updated MM4S module with 2 different energy consumption settings from energy conscious to high torque to get the tough jobs done!

FEATURES

• Next Generation MM4S Smart Module: On board diagnostics with audible feedback for adjustment and power issues

• “PTS”: 5 second electronic adjustment for easy post installation adjustment

• Electric dogging rated for continuous duty - Auto re-engage if push pad is pulled from dogged position

• Low Current Draw - Field switchable to “High Torque” mode

• Up to 300’ wire run with 2-18ga wire - Long wire runs provides installer with convenience of placing the Command locking hardware power supply in a centralized location; i.e. the same closet as the access control panel

• Push-n-Go Pigtail + 6’ cable with Quick Connect for MM4S module to easily connect to power supply lead

• Optional Request-to-exit can be built-in

• 3-year “no hassle” warranty

SPECIFICATIONS

Voltage:

• Voltage range – 24 to 28 VDC

• System protection – unit shutdown when voltage exceeds 28VDC

• Standard - Average Current Peak: 900A, Average Current Hold: 200mA

• High Torque - Average Current Peak: 2A, Average Current Hold: 250mA

• PTS adjustment – approx. 1/4”

Wire Run:

• 300’ with 18ga wire

Device Cutdown Details:

• 36” - 3”

• 48” - 5.5”

Command Access MLRK1-LSDA2 Matrix

Command Access MLRK1 Series Latch Retraction Kits Product Reference Chart